Microwave Oven Installation - Russell Hobbs RHM2013 User Manual

20 litre silver digital microwave with grill
Table of Contents

Advertisement

Microwave oven Installation

1
Select a level surface that provides enough space for the outlet vents.
2
A minimum clearance of 3 inches (7.5cm) is required between the oven and any adjacent walls. One
side must be open. Leave a minimum clearance of 12 inches (30cm) above the oven.
3
Place the oven as far away from radios and TV's as possible. Using the oven may cause
interference with the reception.
4
Open the oven door and take out the accessories, clean the inside with a
soft, damp cloth. Place the turntable support and the turntable in the cavity.
5
Plug the oven into a suitable 13Amp mains socket, make sure the voltage
the same as on the rating label (do not use extension cables or mains
socket adaptors).
Warning: do not install the microwave oven over a cooker or other heat producing
appliance, this will damage the oven. Do not install over a sink.
30cm
7.5cm
7.5cm
Knowing you microwave oven
Do not operate the microwave oven unless the turntable is securely in place and can rotate freely. It is
normal for the turntable to rotate in either direction.
Make sure the turntable is the correct side up. Carefully place cookware onto the turntable to avoid
possible breakage.
When removing the turntable from the microwave oven, handle with care.
Open
4
is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents