Advertisement
INSTRUCTIONS FOR INSTALLATION
RECEIVER:
•
Mount the receiver with screws and plugs included
in the kit.
•
Connect the wires correctly.
•
Ensure cooling for proper operation. Do not cover it
during operation.
TRANSMITTER:
1) Installation with screws (included in the kit):
•
Carefully remove the cover.
•
Install the switch with screws and plugs.
•
Carefully place the cover back to the switch.
•
Test the operation of the switch and receiver.
2) Installation with adhesive patch (included in the
kit):
•
Clean the installation surface and the back of the
switch.
•
Stick the switch to the installation surface by
adhesive patch.
Attention:
•
Avoid to installation the Switch/Receiver on or
directly near metallic surface as this may reduce the
operation range.
•
When installation switch onto a UPVC door frame,
always check the operating range before final
installation.
All manuals and user guides at all-guides.com
PROBLEMS AND TROUBLESHOOTING
The receiver does not
control the light when
press the switch.
The lights keep blinking
Reduced range
TAKING CARE OF THE NATURAL ENVIRONMENT
CLEANLINESS
1.Check it is correct the supply voltage.
2.Make sure that the transmitter has
been paired to the receiver.
1.Please make sure that the lamp's
power is higher than 5W.
1.Metal structures, including door
frames,
transmission range. Avoid to mounting
the transmitter/ receiver on or near
metal structures.
2.Other electric equipment can cause
radio interference that affects your
receiver.
3.Walls, doors and ceilings will reduce
the range.
•
The product and its components are not harmful to
the environment.
•
Please dispose the package elements separately in
containers for the corresponding material.
•
Please dispose the broken product separately in
containers for out of usage electrical equipment.
can
result
in
reduced
2
Advertisement
