Keysight Technologies 11636C Operating And Service Manual

Power divider

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Keysight 11636C/D

Power Divider

Operating and

Service Manual

Table of Contents

Need help?

Do you have a question about the 11636C and is the answer not in the manual?

Questions and answers

Summary of Contents for Keysight Technologies 11636C

Page 1 Keysight 11636C/D Power Divider Operating and Service Manual...
Page 2 FAR 27.401 or DFAR could result in personal injury or death. 227.7103-5 (c), as applicable in any Do not proceed beyond a WARNING technical data. notice until the indicated conditions are fully understood and met. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 3: Regulatory Information
To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: – www.keysight.com/find/mta (product-specific information and support, software and documentation updates) – www.keysight.com/find/assist (worldwide contact information for repair and service) Keysight 11636C/D Power Divider Operating and Service Manual...
Page 4 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 5: Table Of Contents
......... . .27 Keysight 11636C/D Power Divider Operating and Service Manual...
Page 6 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 7 List of Figures Figure 1-1 Keysight 11636C DC to 50 GHz Power Divider ..10 Figure 1-2 Keysight 11636D DC to 67 GHz Power Divider ..11 Figure 2-1 Keysight 11636C/D schematic and dimensions .
Page 8 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 9 Keysight 11636C/D Power Divider Operating and Service Manual Introduction Product Overview This chapter provides an overview of the Keysight 11636C/D power divider.
Page 10: Introduction
Any port may be used as an input, as the Keysight 11636C/D provides a symmetrical power division. The 11636C/D can also be used as a power combiner.
Page 11: Features
– Excellent amplitude (0.4/0.65 dB from DC to 67 GHz) and phase tracking (±4°/ ±7° typical) minimizes amplitude and phase difference between the two outputs to ensure an accurate power division. – Low SWR of 2.1 at 67 GHz minimizes your measurement uncertainty Keysight 11636C/D Power Divider Operating and Service Manual...
Page 12 Introduction THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 13 Keysight 11636C/D Power Divider Operating and Service Manual Characteristics and Specifications Specifications and Characteristics Environmental Conditions...
Page 14: Characteristics And Specifications
Characteristics and Specifications Specifications and Characteristics For the specifications and characteristics of the 11636C/D power divider, refer to the technical overview document at www.keysight.com/us/en/assets/7018-01590/technical-overviews/ 5989-6698.pdf. Physical Dimensions The table below lists the physical dimensions of 11636C/D Power Divider. Pin depth 0.000 to 0.076 mm (0.000 to 0.003 in)
Page 15: Figure 2-1 Keysight 11636C/D Schematic And Dimensions
Characteristics and Specifications Figure 2-1 Keysight 11636C/D schematic and dimensions Keysight 11636C/D Power Divider Operating and Service Manual...
Page 16: Environmental Conditions
Characteristics and Specifications Environmental Conditions The 11636C/D is designed to fully comply with Keysight Technologies’ product operating environmental specifications. Table 2-1 Table 2-2 list the environmental specifications of 11636C and 11636D power dividers respectively. Table 2-1 11636C Environmental Conditions Environmental condition...
Page 17 0.3 Grms, 5-500 Hz Altitude – Operating 4,600 meters (15,092 feet) – Non-operating 4,600 meters (15,092 feet) ESD immunity – Contact Discharge 4 kV (to center conductor) – Air Discharge 15 kV (to outer conductor) Keysight 11636C/D Power Divider Operating and Service Manual...
Page 18 Characteristics and Specifications THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 19 Keysight 11636C/D Power Divider Operating and Service Manual Installation and Verification Installation Operating Instructions Performance Tests Service Instructions This chapter mainly focuses on the installation of the power divider and operating instructions to walk you through the quick-check procedure to ensure that the power divider is working before its implementation in the system.
Page 20: Installation And Verification
2 If the contents are incomplete, if there is mechanical damage or defect, or if the instrument does not pass the electrical performance test, contact the nearest Keysight Technologies Sales and Service office (refer to “Sales and Technical Support” on page 3).
Page 21: Operating Instructions
The s-parameter measurement is the best way to determine if the power divider is working properly. Figure 3-1 Quick-check configuration Keysight 11636C/D Power Divider Operating and Service Manual...
Page 22: Performance Tests
Procedure 1 Set up the network analyzer for 2-port measurement and perform 2-port calibration after the network analyzer has been warmed up for 30 minutes. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 23: Figure 3-2 Input Return Loss Test Setup
2 Connect ports 1 and 2 of the power divider to the ports 1 and 2 of the network analyzer respectively. Terminate port 3 of the power divider with 50 ohm load (refer to Figure 3-2). Figure 3-2 Input return loss test setup 3 Measure the reflection parameter, S11. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 24: Output Tracking
2 Connect ports 1 and 2 of the power divider to the ports 1 and 2 of the network analyzer respectively. Terminate port 3 of the power divider with 50 ohm load (refer to Figure 3-3). Keysight 11636C/D Power Divider Operating and Service Manual...
Page 25: Figure 3-3 Output Tracking Test Setup (Port 3 Terminated)
4 Now connect ports 1 and 3 of the power divider to the ports 1 and 2 of the network analyzer respectively. Terminate port 2 of the power divider with 50 ohm load (refer to Figure 3-4). Keysight 11636C/D Power Divider Operating and Service Manual...
Page 26: Figure 3-4 Output Tracking Test Setup (Port 2 Terminated)
Output tracking test setup (Port 2 Terminated) 5 Measure the S31, S32 and S33 parameter values and perform “Data-Memory” math operation. The “Data-Memory” operation result is the output (phase and amplitude) tracking measurement result. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 27: Service Instructions
Adjustment The power divider does not have internal adjustments and should not be opened. Repair The 11636C/D power divider is not recommended for repair as most components are not easily removed. Maintenance The connectors, particularly the connector faces, must be kept clean.
Page 28 Installation and Verification THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 11636C/D Power Divider Operating and Service Manual...
Page 29 This information is subject to change without notice. Always refer to the English version at the Keysight website for the latest revision. © Keysight Technologies 2007-2021 Edition 4, November 5, 2021 Printed in Malaysia 11636-90005 www.keysight.com...

This manual is also suitable for:

11636d