Ac Line; Led Indicator; Break-In And Warm Up; Cleaning And Maintenance - Fosgate Audionics FA10.0 Owner's Manual

Point zero series
Table of Contents

Advertisement

AC Line

The FA10.0/FA12.0/FA15.0 operate from a 115 VAC/60Hz power line.
The FA10.0CE/FA12.0CE/FA15.0CE operate from a 230 VAC 50/60Hz power line. Connection is made
by a 16 gauge, IEC Type 320, grounded line cord. For safety considerations only a properly grounded
(earthed) receptacle should be used. If a grounded circuit is not available, do not break off the ground
pin; use the proper adapter plug for a two wire receptacle with the grounding plug suitably connected
to earth ground.
Important: The power line fuse is mounted on the rear panel. If this fuse blows, replace it only with
the same type and rating as indicated in the parts list.

LED Indicator

Amplifier operation is monitored internally and has a
status LED. This indicator can be used for system
troubleshooting. The LED will illuminate GREEN if
signal is present at the subwoofer's input. The LED will
COLOR
STATUS
turn off and the amplifier will go into sleep mode if
GREEN
Power on
signal is not present.
NO LED
Sleep Mode
Break-in and Warm-up
We recommend initially breaking in the subwoofer for approximately 8 hours with musical information
to establish the subwoofer's natural bass response.
Cleaning & Maintenance
There is no requirement for regular maintenance on the electronic components of the subwoofer. If the
cabinet or woofer becomes soiled, it can be cleaned using a damp, soft cloth. If the subwoofer is locat-
ed in a particularly dusty environment, cleaning the inside with compressed air or vacuuming every 18
to 24 months is sufficient.
– 10 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fa12.0Fa15.0

Table of Contents