Subscribe to Our Youtube Channel
Summary of Contents for Jumply Adventure 2020/01
- Page 1 Adventure Baby Carrier INSTRUCTIONAL INSTRUCTIONAL MANUAL MANUAL MODEL 2020/01 MODEL 2020/01...
-
Page 2: Contents Page
CONTENTS PAGE CONTENTS PAGE SAFETY INSTRUCTIONS PAGE 1-5 GETTING TO KNOW YOUR CARRIER PAGE 6-9 FITTING THE CARRIER TO YOUR BODY PAGE 10-12 USING THE CHILD RESTRAINT SYSTEM & LOADING YOUR CHILD PAGE 13-19 ATTACHING THE HOODS PAGE 20-25 ATTACHING THE RAIN COVER PAGE 26-27 CARE INSTRUCTIONS PAGE 28... - Page 3 SAFETY SAFETY INSTRUCTIONS INSTRUCTIONS...
- Page 4 Thank you for purchasing your Jumply Adventure Baby Carrier. We hope that both you and your little adventurer enjoy it. Before you take it on the first adventure, please read these instructions to help you get the most out of your carrier.
-
Page 5: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING: THIS IS NOT A FREE STANDING CARRIER Always ensure your child is securely strapped into the carrier Do not leave your child unattended in the carrier Only carry child with restraint fastened Child must be able to sit upright unassisted Maximum total carry weight = 15.0 kg... - Page 6 » Care should be taken to avoid injury to the child’s feet when the carrier is on or near the floor The maximum recommended load for your Jumply Adventure Baby Carrier is 15kg...
-
Page 7: Intended Function
INTENDED FUNCTION INTENDED FUNCTION Your Jumply Adventure Baby Carrier is intended to hold your child, on your back, while walking only. It is not intended to safely hold your child while engaged in sporting activities such as skiing, cycling, running, or other similarly vigorous activities that could affect the safety of you and your child. - Page 8 GETTING TO GETTING TO KNOW YOUR KNOW YOUR CARRIER CARRIER...
- Page 9 1. Protective shelter 6. Side wing 2. Zip pocket for Rain Coat 7. Side Compression Buckles 3. Main storage section 8. Side stabilising strap 4. Harness section 9. Waist belt pocket 5. Removable pillow 10. Foot stirrups...
- Page 10 1. Expandable storage pocket 5. Waist belt pocket 2. Main storage section 6. Top stabilising strap 3. Harness section 7. Carry handle 4. Side stabilising strap...
- Page 11 ADJUSTABILITY ADJUSTABILITY 1. Hip belt buckle 5. Shoulder pads 2. Hip Belt 6. Sternum strap 3. Shoulder pad adjustment straps 7. Sternum strap runner 4. Top stabilising strap 8. Lumbar pad REFER TO PAGES 11 & 12 FOR FITTING INSTRUSTIONS...
- Page 12 FITTING THE FITTING THE CARRIER TO CARRIER TO YOUR BODY YOUR BODY...
- Page 13 FITTING THE HARNESS TO YOUR BODY STEP 1: FIT THE HIP BELT AND SHOULDER STRAPS » Put approximately 6kg in your carrier to simulate in-use weight » Extend the shoulder pad adjustment straps using the tension lock (pg. 9) » Extend the side stabiliser straps by using tension lock (pg.
- Page 14 STEP 2: ADJUST THE SHOULDER PADS » Tighten the shoulder pad adjustment straps and top stabiliser straps until they are comfortable. When the shoulder straps are adjusted correctly they should curve neatly over your shoulders without leaving any gaps and without cutting into your arms.
- Page 15 USING CHILD USING CHILD RESTRAINT RESTRAINT SYSTEM SYSTEM & & LOADING YOUR LOADING YOUR CHILD INTO THE CHILD INTO THE CARRIER CARRIER...
- Page 16 USING CHILD RESTRAINT SYSTEM USING CHILD RESTRAINT SYSTEM FULLY RELEASE ZIP UNCLIP SIDE COMPRESSION BUCKLE...
- Page 17 USING CHILD RESTRAINT SYSTEM USING CHILD RESTRAINT SYSTEM AFTER INSERTING CHILD, FASTEN WAIST BUCKLE FASTEN STERNUM BUCKLE AND ADJUST FOR SNUG FIT ADJUST SHOULDER STRAP LENGTH AT BASE...
- Page 18 USING CHILD RESTRAINT SYSTEM USING CHILD RESTRAINT SYSTEM ADJUST TOP SEAT HEIGHT ADJUSTER ADJUST LOWER SEAT HEIGHT ADJUSTER CLIP AND TIGHTEN SIDE COMPRESSION BUCKLE REFER TO PAGES 17,18 & 19 FOR DETAILED INSTRUCTIONS ON LOADING YOUR CHILD INTO THE CARRIER & USING THE CHILD RESTRAINT SYSTEM...
- Page 19 LOADING YOUR CHILD INTO THE CARRIER & USING THE CHILD RESTRAINT SYSTEM For safe use of the carrier, the child harness should be securely fastened and adjusted in accordance with these instructions every time you use it. The first few times you load the carrier, it is recommended you have the assistance of a helper to read the instructions and help with loading the child as necessary.
- Page 20 STEP 2: ENSURE THE CARRIER IS STABLE » Ensure the carrier is on flat, level ground for maximum loading stability. Note: the first time you load your child into the carrier, the seat height may not be set correctly. If you need to adjust the seat height, remove your child from the carrier before adjusting it further.
- Page 21 STEP 4: ADJUST THE SHOULDER PADS » Once your child is comfortably seated, engage the left and right side shoulder strap adjusters to the side of the seat. Tighten the until the harness is comfortably snug across your child's shoulders and hips. »...
- Page 22 ATTACHING ATTACHING THE HOODS THE HOODS...
- Page 23 ATTACHING THE ATTACHING THE HOODS HOODS SUN HOOD SOLD SEPARATELY SUN HOOD SOLD SEPARATELY...
- Page 24 ATTACHING THE PROTECTIVE SHELTER ATTACHING THE PROTECTIVE SHELTER INCLUDED WITH THE ADVENTURE BABY CARRIER INCLUDED WITH THE ADVENTURE BABY CARRIER SLIDE THE SHELTER ARMS INTO THE ARM POCKETS ARM POCKET VIEW WHEN INSERTED FASTEN THE ATTACHMENT TOGGLE INTO THE LOOP TO SECURE THE SHELTER.
-
Page 25: Attaching The Sun Hood
ATTACHING THE SUN HOOD ATTACHING THE SUN HOOD SOLD SEPARATELY SOLD SEPARATELY SLIDE THE HOOD ARMS INTO THE HOOD ARM POCKETS ARM POCKET FASTEN THE ATTACHMENT TOGGLE INTO THE LOOP TO SECURE THE SUN HOOD. NOTE THIS SHOULD BE TIGHT TO FASTEN LOCATE THE TOP LOOPS ON THE OPPOSITE SIDE. - Page 26 SECURING THE MOSQUITO NET SECURING THE MOSQUITO NET SOLD SEPARATELY SOLD SEPARATELY LOCATE THE ELASTIC TOGGLE ON THE SUN HOOD (1) SUN HOOD LOOP (2) AND INNER LOOP (3) LOOP THE ELASTIC TOGGLE (1) THROUGH THE SUNHOOD LOOP (2) THREAD THE ELASTIC TOGGLE (1) THROUGHT THE INNER LOOP (3) TO SECURE OUTER LOOP...
- Page 27 ROLLING UP THE MOSQUITO NET ROLLING UP THE MOSQUITO NET ON THE SUN HOOD ON THE SUN HOOD SOLD SEPARATELY SOLD SEPARATELY UNBUTTON BOTH WHITE PRESS STUDS TO RELEASE THE WINGS OF THE NET FOLD IN THE WINGS OF THE NET TO THE CENTER ROLL FROM THE BOTTOM UP SECURE THE ELASTIC...
- Page 28 ATTACHING ATTACHING THE RAIN THE RAIN COVER COVER...
-
Page 29: Attaching The Rain Cover
ATTACHING THE RAIN COVER ATTACHING THE RAIN COVER SOLD SEPARATELY SOLD SEPARATELY PLACE RAIN COVER LOOSELY OVER THE ADVENTURE BABY CARRIER. NOTE THAT EITHER THE PROTECTIVE SHELTER OR THE SUN HOODMUST BE ATTACHED FIRST FASTEN TO THE OUTER ATTACHMENT LOOPS PULL TIGHTLY DOWN OVER THE ADVENTURE BABY CARRIER OUTER LOOP... -
Page 30: Care Instructions
CARE INSTRUCTIONS CARE INSTRUCTIONS To get the best from your Adventure baby Carrier, we recommend regular cleaning and the following maintenance. » Clean your Adventure baby Carrier with a non- detergent soap, a soft bristled brush and cold water. » Detach the head pillow that sits in front of the child to clean separately. -
Page 31: Maintenance
» Immediately check these areas if you suffer an accident with your carrier. If at any stage you notice damage to any part of your carrier, discontinue use and contact Jumply via email (nathan@jumply.com.au ) immediately. Do not use again until you have had the issue... - Page 32 » For any warranty inquiries please conatct us via email (nathan@jumply.com.au) » We will require a receipt or proof of purchase and photos of the issue for any warranty claims.
-
Page 33: Contact Information
CONTACT INFORMATION CONTACT INFORMATION Jumply PO Box 106, Black Rock, Victoria 3196 Australia ABN: 34964711550 Website: jumply.com.au Email: nathan@jumply.com.au Follow us on Facebook and Instagram @jumply.au...
Need help?
Do you have a question about the Adventure 2020/01 and is the answer not in the manual?
Questions and answers