Height Adjustment; Anti-Collision Function; Turning The Anti-Collision Function On/Off; Reset - STRUCTUBE LEVER Operation Manual

Operation Instructions

Height Adjustment:

Press the "▲" or "▼" button to adjust the height.

Anti-collision function:

This model is equipped with an anti-collision feature. If during the up / down function the
table experiences sudden resistance it will automatically stop and reverse direction to prevent
injury and/or damage to whatever may be in its path of travel.
Turning the anti-collision funtion on/o :
Hold the "▲" and "▼" button for more than 5 seconds at the same time to turn the
anti-collision feature on or o .

Reset:

Hold the "▼" for more than 5 seconds, the desk runs in reverse until it stops, release"▼",
the reset finished.

Troubleshooting

a. If "▲" or "▼" do not work, check that the power source is connected and capable of
delivering AC110-240V, 50/60Hz.
b. If the unit does not go up, it is most likely over-loaded. Max weight: 50kg. Frequently using
the device at full capacity may reduce its lifespan.
1
Height Adjustable Desk "LEVER"
Operation Manual
75.59.31.v_2