Advertisement
5)
freely, and then holding the handles, slowly pull out the lamp unit from the projector.
6) Insert the new lamp unit taking note of its direction, and use a Phillips screwdriver to
Do not smear the glass surface by touching it with your hand.
7)
Note
When replacing with the new lamp unit (Product No.: ET-LAE16), the projector resets the total usage time of
the lamp unit automatically.
while projecting.
TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER
To prevent glass fragments from scattering, hold the lamp unit vertically when replacing it. When the
projector is attached to the ceiling, do not work directly under the lamp cover or put your face near it.
Remove the lamp cover slowly.
LAMP NO. : ET-LAE16
Disposal of Old Equipment
Only for European Union and countries with recycling systems
This symbol on the products, packaging, and/or accompanying documents means that used electrical
and electronic products must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Environment care information for users in China
This symbol is only valid in China.
3-
ENGLISH
Lamp unit
Screw
. If not, the lamp unit may drop off
Advertisement
