Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for iMartine Vrillo J300
Summary of Contents for iMartine Vrillo J300
- Page 1 User Manual...
-
Page 2: Product Introduction
Product Introduction Key Function Sweep/ON &OFF • Short press to start Sweep/Pause Welcome to use • Long press for 3s for ON/OFF • Long press for 15s for forced shutdown Thanks for choosing Smart Robot Vacuum Cleaner! under abnormal circumstances It is a high-end intelligent planning cleaning robot which combines high accuracy radar and various sensors can realize collaboration through navigation algorithm, draw a room map in real time and plan the cleaning route and features automatic cleaning and automatic charging without manual intervention. - Page 3 Product Introduction Product Introduction Parts List Parts List Fluffy main brush X 1 Silicone brush X 1 Charging baseX1 Remote control X1 Duster clothX1 Multifunctional brush X 1 Rolling brush cover X 1 Suitable for Fluffy main brush + Silicone brush AdapterX1 HEPA filter+sponge filterX1 2 in 1 electric-controlled...
- Page 4 Product Introduction Product Introduction Sensor and Structure Robot LDS laser ranging sensor Anti-fall sensor Anti-collision sensor for radar Charging contact Infrared recharging sensor Universal wheel Side brush Filter screen cover Wall sensor Battery cover Dust bin button Driving wheel Rolling brush Anti-collision sensor System reset button Rolling brush cover buckle...
- Page 5 Product Introduction Product Introduction Charging Base Installation 3. Please do not move the charging base arbitrarily and keep it out of direct sunlight。 1.Connect power line and feed the excess wire into the slot。 Note： •If the charging base is relocated, the host may fail in positioning and lose the map.
-
Page 6: Installation
Product Introduction Installation 8. Installation of mopping module ② Fill the water tank: uncap the cover and fill with water ③ Install the module: push the module horizontally along Installation ① Installation of mopping cloth: paste the mopping cloth flatly to the rear part of the robot. - Page 8 Installation Installation Installation ON/OFF When the robot is finished working, press the button in the 9.Remove the mopping module middle of the water tank to remove the mopping module Long press key for 3s, the indicator light is on and the machine is started.
- Page 9 Instructions Installation Cleaning mode Spot cleaning User-defined area cleaning Wi-Fi reset After the robot is powered on, it will scan and generate When a local area needs a deep sweep, the user specifies a Use the mobile APP to set the size and location of the area If the mobile phone cannot be connected to the machine due the map and divide it into areas intelligently.
-
Page 10: Daily Maintenance
Installation Daily maintenance Rolling brush Side brush (clean it regularly) (clean it regularly) 1. Turn over the machine and press the buckle on the Rolling 1.Turn over the machine and pull out the side brush upwards. rush cover to take out the Rolling brush. 2.Remove hair and dirt and reassemble the side brush. - Page 11 Daily Maintenance Daily Maintenance Clean filter Mopping module (cleaned it every time) Dust box and filter screen Filter screen cleaning (clean it regularly) (clean it regularly) (clean it regularly) 1.Press the button and pull out the dustbin backward. 1.After a long usage, remove the filter gauze, sponge and HEPA. Dust 1.Remove the mop, pure out the water from water tank.
- Page 12 Daily Maintenance Daily Maintenance Sensor (clean it regularly) 2.Clean the mop, dry the water tank and mop Sensor (cleaned monthly) Battery Clean the sensors by soft mop, include: Upgrade firmware using mobile APP. If new firmware is 1.Clean the sensors along the wall on the right. detected, upgrade it according to prompt.
-
Page 13: Basic Parameters
Basic Parameters Common Problems Machine Problem Solution Item Parameter •In case of a low battery level, please place the robot on the charging base and align it at the electrode plate,the machine will be started automatically (if the robot is completely powered off,it can be started The robot cannot be started Model J300... -
Page 14: Troubleshooting
Troubleshooting Troubleshooting Prompt Tone Solution Prompt Tone Solution Error 1: Oh dear! I cannot find the dust collector Cleaning is triggered when the dust box is take out Error 12: Please place me correctly! The robot is tilt The top radar is covered or placed in an open area Error 2: Please check if the radar on top has been covered or blocked (there is not obstacle within an area of 6×6m Error 13: Please check if my wheels have become blocked somewhere... -
Page 15: Safety Information
Content and Name of Hazardous Substances Safety Information Usage Limitations Part Name Hazardous Substance • The product is used for floor cleaning in a home environment only and cannot be used for outdoor (such as open terrace), non-ground Plastic casing Circuit board Power line Battery... -
Page 16: Warranty Policy
Safety Information Warranty Policy Warranty Period Battery and Charging 1.If the product has any performance failures set out in Product Performance Failure Table of Smart Robot Vacuum Cleaner within • Please do not use battery, charging base or charger provided by any third parties. 7 days as of the date received and upon detection of Intelligent After-sales Center, free changing or refunding service will be •... - Page 17 Warranty Policy Three Guarantees Non-warranty Clause User Information 1.Unauthorized maintenance, misuse, collision, negligence, abuse, penetration of liquid , accident, alteration and incorrect use of other Name: Model: accessories, or tearing up, altering label and false proof mark. 2.The validity period of “three guarantees” expires. 3.Damages caused by force majeure.
- Page 18 Experience Intelligent Technology and Enjoy a High-quality Life...