Gainsborough K206 Instructions For Use

Solar Pagoda Statue
K206
v001: 11/10/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
OPERATION
FOR FIRST TIME USE:
Step 1:
Fully charge the battery before first use. Charge under direct sunlight in the <ON> position for 2 days.
Step 2:
Once the batteries are fully charged, set the ON/OFF switch to ON. If the lamp does not turn on after dark
refer to Maintenance section.
Your solar light will automatically turn on once it gets dark.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight
for at least 8 hours per day. The solar panel is on top of the
pagoda. The number of hours the light will illuminate is directly
proportional to the hours of sunlight it receives. If the light is
placed in a shaded area, it will not be able to fully charge and its
illumination time will be limited. Do not place the light near other
outdoor lighting like porch or streetlights. These may fool the
sensor and keep the light from coming on, or cause it to turn off
automatically
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
(H) 23 x (W) 18 x (D) 18cm
Material: Resin
Battery: 1x AAA Ni-MH 300MAH Rechargable
•
TRADITIONAL PAGODA DESIGN
•
IN A GREYSTONE LOOK FINISH BUT MADE OUT
OF DURABLE AND WEATHER PROOF POLYRESIN
SO YOU CAN LEAVE OUTDOORS ALL YEAR
ROUND
•
AT DUSK THE PAGODA AUTOMATICALLY
ILLUMINATES WITH WARM WHITE LEDS (NOT
REPLACEABLE) PROVIDING A WARM AND
SOOTHING GLOW
•
THE PERFECT WAY TO RELAX AND ENJOY YOUR
GARDEN
•
BUILT IN DISCREET SOLAR PANEL
•
PLACE ON YOUR PATIO, BY A POND OR A WATER
FEATURE, BY YOUR DOOR ETC ETC