Download Print this page

Alpine communications FusionTV Quick Start Manual

Trouble:

I cannot turn on/off my set top box.

There is no red light.

I cannot change the channel.

I cannot bring up the Guide.

Solution:

Verify that the STB button on the top of the remote control is illuminated so that the

remote will communicate with the STB.

FusionTV Trouble Shooting

Solutions

Page 1

Table of Contents

Do you have a question about the FusionTV and is the answer not in the manual?

Page 1 Verify that the STB button on the top of the remote control is illuminated so that the remote will communicate with the STB. Other Possible Solution: Verify that the batteries in the remote control are charged and in good condition. Page 1 FusionTV Trouble Shooting Solutions. Call 245-4000 for immediate assistance.
Page 2 This should restore the picture and/or audio. Next Possible Solution: Reboot the Box Press the Menu button on the remote to launch the Menubar. Arrow to Settings and then press OK. Page 2 FusionTV Trouble Shooting Solutions. Call 245-4000 for immediate assistance.
Page 3 Caller ID is not appearing on my TV screen when the telephone rings. Solution: Verify that you are subscribed to Caller ID from Alpine Communications by checking your home telephone for this feature. If you do not have Caller ID, please call Alpine at 245-4000 to subscribe.
Page 4 If you've tried all the troubleshooting tips above and re-programming your remote does not resolve your issue, your remote control may be damaged or defective. Call Alpine at 245-4000 for a replacement remote control. Page 4 FusionTV Trouble Shooting Solutions. Call 245-4000 for immediate assistance.