Page 1
Quick Reference Guide Charging the Holster After cleaning and disinfecting, place the holster into the charging base. The holster will emit a two-tone beep to indicate correct placement into the base. Holster Inside Charger SOLID = Battery is fully charged. FLASH = Battery is charging.
Page 2
Biopsy Tissue Assembly Biopsy Button Selection Priming the System Step 1 Step 1 Interrupt a biopsy cycle (as previously described) Push the active biopsy button on the holster to acquire leaving the aperture open. Inject 1cc of sterile saline a sample. The biopsy cycle proceeds: a vacuum is Ensure the probe is attached.