Air King K14-A Service And Installation Manual page 14

AIR MACHINE INSTALLATION & MOUNTING
Mounting air machine to cement or brick wall:
1. Before mounting install a six inch piece of carpet or weather stripping
approximately ¼ " thick in the center of the back of the machine.
This will help reduce noise and vibration of the machine.
recommend that the machine not be mounted on a metal wall.
2. Drill ½ inch hole in the wall for wall fasteners.
3. Insert faxtener into hole flush with wall.
4. Position unit over fasteners.
5. Insert lag screws fitted with lock washers and flat washer into fastener.
6. Start all four lag screws before tightening securely.
7. See page 6 for electrical requirements.
8. See Diagram Below.
14"
9 ½ "
Back of the Machine
14