Summary of Contents for LogiLink HD0101
- Page 1 Size: 84 x 118.4mm * 100P 雪銅紙 * 拉頁, 一本德文(在前)英文手冊, 另一本西班牙文(在前)波蘭文手冊 * 兩面, 正四色反四色彩色印刷...
-
Page 2: Safety Instructions
In any case, liability for loss of data is limited to the effort that is necessary to restore from existing backup copies. Congratulations to the Purchase of Logilink HD0101! Please read the Manual and Safety Instructions before using the product for the first time. Otherwise damage can be the result. - Page 3 2.0 Introduction The HDMI Repeater extends the length of any HDMI cable by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector. The HDMI Repeater will clean out the digital noise (sparkles) in your picture. The input of the HDMI repeater is connected with a long HDMI (male to male) cable from the HDMI device like DVD player or Satellite set top box with a HDMI output port.
-
Page 4: Specifications
2.2 Specifications Signal Inputs/Output Input Video Signal 5 Volts p-p (TTL) Maximum Single Link Range 1920x1080P Output Video HDMI High Speed HDMI Input/Output Type A 19 pin Connector Operating Frequency Vertical Frequency Range 50/60Hz Video Amplifier Bandwidth 1.65Gbps/165MHz Resolutions(HDTV) Interlaced(50&60Hz) 480i, 576i, 1080i Progressive(50&60Hz) 480p, 576p, 720p, 1080p... -
Page 5: Panel Descriptions
3.0 Panel Descriptions HDMI input Power input HDMI output 4.0 Connection and Operation 1) Connect the source device output into input of the HDMI Repeater and connect output of the HDMI Repeater to the HDMI display unit. The HDMI Repeater is put close to the HDMI display unit (Input cables are optional) * Please refer to connection diagram section.