Advertisement
9
STEP 9. Mount and fix the left and right front legs (19 and 20) onto the
side rails.
11
STEP 11. Attach and fix the last cross member (11) between the front legs. STEP 12. Place the workbench upright onto its legs. Slide the pre-
13
STEP 13. Place the bottom plate (A) onto the lower part of the workbench
and table top (B) onto the top of the workbench.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
10
STEP 10. Mount a cross member (11) between the top of the front legs
keeping the small ledge towards the top of the bench.
12
assembled drawer into place along the guide rails.
14
STEP 14. Position the assembled tool plate from STEP 6, inside the rear
brackets and attach onto the workbench by using four M6 x 15mm bolts
through the holed plate at the back and four M6 x 10mm bolts through the
side holes.
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
AP12600 - 2 - 161006
Advertisement
