Advertisement
Secure Vision, Secure Safety
www.secursignal.com
Interlock Func�on Programming
Direc�on
Push C1 and C9 together for 5 seconds to enter interlock programming mode for C9-C10. L4 and R4
will be steady on to indicate you are now in programming mode for C9 and C10.
Programmable
-Hold C10 for 5 second to ac�vate interlock func�on. Now C10 will be disabled when C9 is ac�vated.
Key: C10
|The C10 Red LED will flash 3 �mes to indicate it has been set, flash 1 �me to disable to se�ng.
-Push C1 and C9 for 5 seconds to exit interlock programming mode.
Warning / Traffic light flash pa�ern indicator: this func�on is only available with our TRIDENT lightbar
Direc�on
Press C5 and C8 together for 5 seconds to enter warning/arrow light display programming mode for
C5-C8. L2 and R2 will be steady on to indicate you are now in programming mode for C5-C8.
Programmable
Keys: C5-C8
-By pressing the bu�on, the LED R1 to R5 will indicate which light indicator func�on has been
selected
R1
The LED indicator is set to display Warning Light All Flash
R2
The LED indicator is set to display Middle to Outward
R3
The LED indicator is set to display Arrow Le� to Right
R4
The LED indicator is set to display Arrow Right to Le�
R5
The LED indicator func�on has been disabled
Press C5 and C8 together for 5 seconds to exit programming mode for C5-C8
Reset to Default
Press C1 and C8 together for 10 second to reverse the device back to default
Installation
Attach and secure the controller onto the panel stand. Place the device onto a clean desired surface,
where it can be easily accessible to the user. Use the attached adhesive pad* to secure the device onto the
surface. Should you wish to remove / re-locate the controller, you may use alcohol or similar cleaning
formula to remove the left-over adhesive residue.
* The supplied adhesive pad is designed for one time use. You may replace it with other double side
adhesive tapes.
Manufacturer Limited Warranty Policy:
Warranty extends for Thirty Six (36) months from the date of purchase.
DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE,
UNAPPROVED MODIFICATIONS, FIRE OR OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING
MAINTAINED IN ACCORDANCE WITH THE MAINTENANCE PROCEDURES SET FORTH IN MANUFACTURER'S INSTALLATION
AND OPERATING INSTRUCTIONS VOIDS THIS LIMITED WARRANTY.
Installation Manual:
ID-11 Controller
Manufacturer warrants that on the date of purchase this product. This Limited
Advertisement
