anko 43111497 Instruction Manual

anko 43111497 Instruction Manual

Advertisement

Quick Links

Instruction Manual
Digital Travel Scales
Keycode: 43111497
To make sure to use this scale correctly and keep long life of scale, please read this manual
carefully.

Features:

Max weight capacity: 50 kg
Min weight capacity: 0.05 kg
Division value: 0.01kg
Units: lb, oz, kg, g
Automatic switch off after 30 seconds.

Operation Instructions

Inserting the batteries

1. Remove the battery compartment cover and insert 2 x 1.5V AAA batteries (included).
Ensure batteries are inserted with correct polarity. Do not mix old and new batteries. Do not
mix different types of batteries (alkaline, carbon zinc, rechargeable).
2. Replace the battery compartment cover again.

Weighing

1. Hold the scale level, press the ON/TARE button to switch on. The LCD screen will read
"HELLO", then show 0g, and will be ready to weigh.
2. Hang the object to be measured using the strap. A live measurement will be shown. When
the measurement is stable, an audible tone will sound & the reading will remain on the LCD
display allowing the object to be put down to easily read the measurement.

Change measurement units

To change the units of measurement, press the UNIT button. The device will cycle between
g/lb/oz/kg with each button press.

Setting target weight

1. Turn on the scale.
2. Press and hold UNIT Button and ON/TARE button simultaneously, after approx. 4 seconds

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 43111497 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for anko 43111497

  • Page 1 Instruction Manual Digital Travel Scales Keycode: 43111497 To make sure to use this scale correctly and keep long life of scale, please read this manual carefully. Features: Max weight capacity: 50 kg Min weight capacity: 0.05 kg Division value: 0.01kg Units: lb, oz, kg, g Automatic switch off after 30 seconds.
  • Page 2 the LCD will indicate the max weight “50kg”. Note: target weight must be in kilograms. 3. Press ON/TARE button to reduce or press Unit button to add. 4. Once the weight is selected, it will flash six times. 5. The LCD will read “hello” and then show 0g, then you can weigh goods. 6.
  • Page 3 reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Table of Contents