Download Print this page

LISKA SV-24DF Instructions

Download this manual

Instructions SV-24DF

1. APPEARANCE INTRODUCTION

- The bracelet is made of healthy materiaIs, please be assured to use.

- Due to individual differences, if skin feels uncomfortable while wearing, please stop wearing

and consult the doctor.

2. CHARGING AND START UP

Please charge the product for more than two hours before use. Align the charging port with the

metal contacts on the charging base until the charging indicator appears on the bracelet screen.

- Please use the special charging cable that comes with the package, Keep charging port clear

and dry.

-Note: Do not use a power adapter with an output of more than SV 1A to charge, otherwise the

circuit may be burned, resulting in no charging.

3. APP DOWNLOAD

1.Scan the QR code on the right with your mobile phone Or Go to APP Store to download and

install Da Fit. Please give this software the corresponding permissions to ensure that the Bluetooth

connection is normal.

Page 1 Instructions SV-24DF 1. APPEARANCE INTRODUCTION - The bracelet is made of healthy materiaIs, please be assured to use. - Due to individual differences, if skin feels uncomfortable while wearing, please stop wearing and consult the doctor. 2. CHARGING AND START UP Please charge the product for more than two hours before use.
Page 2 4. BINDING 1. Open the APP and add the bracelet device you want to connect in the APP. When binding, plea- se confirm that the Bluetooth addresses displayed on the APP and the bracelet are the same. (You can check the Bluetooth address of the bracelet in the bracelet settings) 2.
Page 3 8. WARRANTY We do not advise immersion of watches and we do not accept their return as a guarantee, since we consider them only IMPERMEABLE. We also do not recommend having a shower with it, as the hot water vapor can affect both the battery and the clock module.