Table of Contents
Advertisement
Installation, Operation and Maintenance Manual
E-90090007 Rev. 0
Section 3: Storage Instructions
Proper storage is required when the operator will not be used immediately.
1.
2.
3.
4.
5.
An indoor environment is the ideal storage condition for the operator. For additional
information on storage, please contact the manufacturer.
Storage Instructions
Storage Instructions
Remove all dirt, dust, grease, and contaminants from the exposed drive rod (1)
surface by using a soft cloth dampened with an appropriate oil-based solvent.
Avoid using abrasive material when cleaning rod surfaces.
Exposed drive rod (1) must be protected to avoid damage to the surface.
a.
FS style operator: Drive rod is retracted into the cylinder (only a portion
of the rod is exposed). Lightly grease the exposed surface and wrap with
protective material if necessary.
b.
SR style operator: Drive rod is fully extended from the cylinder.
The user must protect the rod surface to avoid damage (which in turn
will compromise and/or damage the sealing capability during operation).
Lightly grease and wrap the rod surface with protective material.
Lightly lubricate all exposed threads and unpainted surfaces (for example, bottom
of pedestal plate).
Cover the operator to prevent the accumulation of dirt and debris.
Repeat the storage steps listed above to ensure the proper storage condition
(in case the operator will be moved and stored again).
Section 3: Storage Instructions
April 2022
5
Advertisement
Table of Contents
