Cronus Laser Binocular Elements Installing the Battery “Mode“ Button Display Focus i. Using a coin, remove the battery cap from the front hinge of “Ranging“/”Power” Button Diopter Adjustment the binoculars by turning counter clock-wise. Focusing Wheel Battery Chamber Eyecup ii. Insert the battery (CR2) with the positive side facing up (Fig.1). the battery cap on.
Startup and Shutdown Setting the Display Focus and Diopter iii. Press button to power on the device. You should see the These binoculars have a diopter (1), display focus (2), and a focus- startup display (Fig.2) by looking through the eyepiece; ing wheel (3)(Fig.3).
Page 4
Menu Screens ii. Keep both eyes open during this set-up. Begin by covering the left objective with your hand. Using the focusing wheel, ad- just until you have a clear image. Once achieved, do not move i. Select Measuring units (Fig.4): the focus wheel.
Page 5
ii. Ranging modes (Fig.5): iii. Measuring Method (Fig.6): • Incline Angle (T) mode displays the incline angle of your • Auto will automatically decide which setting to use: hunt vs golf position to the target. • Golf mode is used to measure smaller objects. The Binoc- •...
Page 6
THE ATHLON GOLD MEDAL LIFETIME WARRANTY* Your Athlon product is not only warranted to be free of de- fects in materials and workmanship for the lifetime of the product. Athlon will also repair or replace, at no charge to you, your product if you should damage it through normal use.
Page 7
TOL L FR EE : 1- 855 - 9 1 3 - 5 6 7 8 CO N TA C T@ A T H LON O P T I CS.CO M 801 N MEADOWBROOK DR, OLATHE, KS 66062...
Need help?
Do you have a question about the CRONUS 10x50 and is the answer not in the manual?
Questions and answers