Fig. 4 4 4 4 ). Fig. battery. Keep in mind that most Volvo radios are coded and will not operate Factory CD Changer (if present) must be disconnected. without the code. Radio code must be available for radio to operate upon reconnection.
Page 3
Fig. Fig. Fig. Fig. 6 6 6 6 dip-switches 6. Connect the 22-pin Molex plug on Adapter harness (See Fig. Fig. Fig. Fig. Fig. Fig. Fig. Fig. 4 4 4 4 7 7 7 7 ) to the 22-pin connector on Module (See Fig. Fig.
Test Operation Test Operation Test Operation Test Operation : : : : 1. Reconnect battery and enter radio code 2. Turn the Radio “ON” 3. Press the “C C C C HGR HGR” button to enter CD Changer Mode Fig. 9 9 9 9 Fig.
Page 5
Radios Radios NO; ; ; ; The PXDPVOL works only on Volvo SC, CT and CR Changer controlling Radios. Radio model numbers are printed on radio face. Can I use the radio buttons to control Can I use the radio buttons to control the Apple d...
Need help?
Do you have a question about the PXDPVOL and is the answer not in the manual?
Questions and answers