Advertisement
Quick Links
Please read this manual before assembling and using the fi xture. Please keep this manual readily accessible for
SPECIFICATIONS
Part No.
Movement
X-Axis
Range
Y-Axis
Z-Axis
Theta
Field of View (F.O.V.)
Magnifi cation/Zoom
Camera Type
Optical Interface
Resolution
Camera Output
Lighting
Power
Dimensions (L x W x H)
Weight
ESD Safe
Specifi cations and design are subject to change without notice.
INITIAL SETUP
Unpacking
•
Remove the packing materials and carefully lift the fi xture out of the box and place it on a stable level surface.
•
Remove the plastic wrapping around the fi xture.
•
Cut and remove the red plastic tie straps and remove the orange camera support.
•
Remove the power supplies, video cables, and mouse from the accessories box.
Setup
•
Adjust the threaded rods for the 4 feet as needed to ensure the fi xture is stable and relatively parallel to your working
surface.
•
Connect the HDMI cable from the camera module to your monitor (not included).
•
Connect the USB mouse to the camera module.
•
Plug in the power supply marked CAMERA into the camera module and press the POWER button.
•
Plug in the power supply marked OPTICS into the right side of the optics module.
•
Insert the handpiece of your HAKKO FR-810B/FR-811 station into the handpiece socket [A].
•
Using an M1.5 hex wrench, tighten the three set screws at the bottom to secure the heater pipe of the handpiece in the
center of the socket.
•
Rotate the handpiece socket and check that the heater pipe is not wobbling. Adjust the three set screws as needed.
SPLIT VISION FIXTURE
INSTRUCTION MANUAL
Thank you for purchasing the HJ4000 Split Vision Fixture.
HJ4000
355 mm (13.9 in)
343 mm (13.5 in)
247 mm (9.7 in)
±30°
16.6°
Optical 1-6X | Digital 10X
CMOS 1/2.5"
C-Mount
5MP, 2592 x 1932 (Max)
HDMI
Dimmable LED
White (Top) / Blue (Btm)
12 VDC Camera | 24 VDC
Lighting
645 x 526 x 504 mm
(25.4 x 20.7 x 19.8 in)
11.92 kg (26.3 lb)
Yes
HJ4000
reference.
HJ4000 Fixture.................. 1
24 VDC Power Supply...... 1
12 VDC Power Supply.... 1
HAKKO FR-811
(Sold Separately)
HAKKO FR-872
(Sold Separately)
CONTENTS
HDMI Cable..................... 1
USB Mouse....................... 1
Instruction Manual.......... 1
Advertisement
Related Manuals for Hakko Electronics HJ4000
Summary of Contents for Hakko Electronics HJ4000
- Page 1 SPLIT VISION FIXTURE HJ4000 INSTRUCTION MANUAL Thank you for purchasing the HJ4000 Split Vision Fixture. Please read this manual before assembling and using the fi xture. Please keep this manual readily accessible for reference. SPECIFICATIONS CONTENTS HJ4000 Fixture....1 HDMI Cable..... 1 Part No.
- Page 2 Rotate the handpiece socket to align the fl at channel with the theta adjustment pin and install the theta adjustment arm [B]. • Place your HAKKO FR-870B/FR-872 Preheater (optional) or other PCB holder within the base frame of the fi xture. HDMI HJ4000 PART NAMES Camera Power Receptacle [S] Z-Axis Stop [T] Z-Axis Fine Adjustment...
- Page 3 NOTE: For greater accuracy, use two contact reticles or an HJ4000 Optics Calibratoin Kit (Optional - PN: 999-719) in place of the PCB target and vacuum pickup tube. CAUTION: DO NOT OVERTIGHTEN THE PRISM PLATFORM SCREWS AS THAT CAN CAUSE DAMAGE TO THE PRISM PLATFORM.
- Page 4 CAUTION: The PCB may still be hot after the refl ow process so use caution when handling. MAINTENANCE The HJ4000 Rework Fixture is desgined to be nearly maintenance free. The only parts of the fi xture that my need attention periodically are as follows: •...