Advertisement
3.Operation
1.1
Display
System time
Network signal
On/Off
Temperature
Status
Print/Log
Micro USB
1.2
Keys
1) On/Off:
On/Off: Press and hold this key for 3 seconds to turn on/off the monitor.
Software upgrading: Use the Micro USB adaptor to get connected to USB disk, press Print\Log key
and On/Off at the same time to enter upgrading mode.
2) Print\Log
Plug the USB disk: Press and hold the key for 3 seconds to export data.
Unplug the USB disk: Press and hold the key for 3 seconds to connect with Bluetooth printer for
printing data.
1.3
Indicators
1) Network indicator (green): When it connects toElitech Cloud, this indicator flashes.
2) Alarm indicator (red): This indicator flashes in low battery. It is normally on in charging.
Network indicator
Alarm indicator
Power indicator
Humidity
Number of points
External sensor port
Advertisement
