Advertisement
Quick Links
Advertisement
Related Manuals for Orava HD-424
Summary of Contents for Orava HD-424
- Page 1 Hair dryer HD-424 Instruction manual HD-424...
-
Page 2: General Safety Instructions And Warnings
ORAVA electrical appliances are manufactured according to the current standards and recognized safety-technical rules. Nevertheless, the use or use contrary to designation may result in the risk of injury or endanger the life of the user or third person, damage to the device and other material values. - Page 3 • Keep the instruction manual as close to the device as possible throughout its service life. Always keep the instruction manual together with the appliance for future use and use by new users. • Use the appliance only for the intended purpose and in the manner specifi...
- Page 4 • Other characteristics of the domestic operating environment (mechanical stress - vibrations and vibrations, occurrence of plant, animals, weather effects ...) are negligible in terms of effect on the correct and safe use of electrical equipment. 1.3 Electrical safety • Before connecting the appliance to the power supply for the fi rst time, make sure that the voltage on the appliance label corresponds to that of the household electrical outlet.
- Page 5 • If you use an extension cord, make sure that the total rated power of all devices connected to the extension cord does not exceed the max. current load on the extension cable. • If you need to use an extension cord or power supply block, make sure that the extension cord or power pack is plugged into a power socket, and not to another extension cord or power supply.
- Page 6 1.4 Safety of persons • This appliance is intended for use and operation by persons without electrotechnical qualifi cation - lay people, according to the instructions specifi ed by the manufacturer. • Device operation includes activities such as switching on and off, user manipulation and setting of operating parameters, visual or auditory inspection of the equipment, and user cleaning and maintenance.
- Page 7 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from fi nger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
- Page 8 2. Special Safety Instructions. Read carefully! • Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualifi cation. Despite all the efforts taken by the manufacturer to ensure safe use, handling and use, it carries with it some residual risks and associated potential hazards.
- Page 9 Check/Startup • We recommend performing both initial and subsequent regular machine inspections. Only use the device with the accessories supplied and approved by the manufacturer. • Never use the appliance if it is incomplete, damaged, or if parts or accessories (eg due to fall) have been damaged during use. There is a risk of electric shock! There is a risk of serious injury! •...
- Page 10 • The device is designed to trim clean and free hair, free from excess moisture. Do not use the device on fully wet hair. Wet dry your hair fi rst with a towel. • Do not use the appliance for synthetic hair. •...
- Page 11 • Do not use the appliance in an explosive atmosphere in the presence of fl ammable substances and vapors, fog or dust, and under atmospheric conditions, where air is easily propagated after ignition. • Do not use the device near sources of excessive heat and open fl...
- Page 12 Warning! • The device and the power cord must not be left unattended when connected to the power supply. Never leave the appliance unattended and freely accessible and do not leave it with a freely accessible power cord. • The device is under dangerous voltage when connected to a power grid.
- Page 13 • Always unplug the appliance from the power supply, allow it to cool down (ambient temperature), clean it carefully and store it in an appropriate and safe place to prevent danger to children, unaccompanied persons or animals. • Do not immerse the power supply cord around the body of the device.
-
Page 14: Operation
Operation Device description: 1. concentrator 2. intake grille 3. cold air switch (COLD SHOT) 4. thermal power switch - position 0, II, III 5. airfl ow intensity switch - position 0, I, II 6. foldable handle 7. hanging loop 8. power cord 9. - Page 15 Commissioning 1. Ensure that the power cord is not wrapped around the appliance before putting it into operation. Allow the device to acclimate to ambient temperature before fi rst use. 2. Place the extension - concentrator or diffuser. Concentrator: With the use of an extractor, you can achieve effective drying of separate hair straps.
- Page 16 Cleaning Warning! Before each cleaning, disconnect the appliance from the mains and allow it to cool down. The switch must always be in the 0 position before connecting or disconnecting the power cord. • Apply the appliance with a soft, clean cloth. Do not use any harsh pow- der detergents or solvents such as alcohol or thinner, otherwise the sur- face of the device may be damaged.
-
Page 17: Technical Specifications
Technical specifi cations Power supply: 220 - 240 V~ 50/60 Hz, 2 000 - 2 200W Class of protection: Dimensions (W x H x D): 21 x 27 x 9 cm (without attachments) Weight: 0,60 kg (without attachments) Noise level: 79 dB (A) The declared noise emission of this appliance is 79 dB (A), which is an acoustic power level A with reference sound power of 1 pW. - Page 18 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The symbol on the product or on its packaging indicates that this product does not belong to household waste.
Need help?
Do you have a question about the HD-424 and is the answer not in the manual?
Questions and answers