Gainsborough K358 Quick Start Manual

Dog with Solar Gazing Ball
K358
v001: 27/08/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Before using first time
Allow light to charge for at least 8-12 hours in
full sunlight with the ON/OFF switch in the OFF
position. The ON/OFF switch is located under
the solar panel. Once the batteries are fully
charged, set the ON/OFF switch to ON. Ideally
align the solar panel to face the midday sun to
maximize charging.
NOTE: The solar panel is located at the back of
the dog.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 6 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Caution: Install the lights where they will not create a trip hazard or cause an obstruction.
Replacing Battery
If the light stops working after it has been used for a long time (about 6-12 months), the battery may be
beyond its lifespan.
Dimensions
19 x 12.5 x 27.5cm
Material:
Polyresin
Contains 1.2V 200mAh Ni-MH AAA Rechargeable battery
LED lights not replaceable
ALWAYS POSITION IN DIRECT SUNLIGHT