Advertisement
the light switch until you find your preferred colour. To turn the light off, hold the light switch
down for two seconds.
Note:
If the mist function turns off automatically, the light will still need to be switched off manually.
Cleaning and maintenance
After use and before storing, drain any left-over water. Wipe with a soft damp cloth and dry thoroughly,
do not use abrasive chemicals as this will damage the diffuser.
Troubleshooting
Problem
No power
Turns off.
No or irregular mist
Water leakage
https://www.XPOtool.com
The Tool Experts
Solution suggestion
Ensure that the power lead is connected correctly and it is the cor-
rect lead that was originally supplied with the product. If so, unplug
the lead from the product and re-install.
Check that there is sufficient water in the tank and that the product
is turned on.
1. Check the inner part for any dirt or debris.
2. Ensure that there is sufficient water in the tank or that it is not over
the maximum fill level.
3. Ensure that the upper and inner covers are assembled correctly.
4. Check that there is no dirt or debris in the air intake vent on the
base of the product.
5. Some environmental factors (such as temperature and humidity)
will affect the visibility of the mist.
1. Ensure that the upper and inner covers are assembled correctly.
2. In low temperatures or humidity, condensation can occur.
3. Ensure the product is sat on a smooth, level surface.
Item 61896
Page 4
05 2022-1
Advertisement
