Advertisement
is switched on by removing the probe cover
or by pressing the Hold or Max/Min button.
Insert the probe into the substance being
measured. The instrument reading may
take a few seconds to stabilise, depending
on the nature of the measurement. The
instrument will automatically turn off after
one hour of inactivity if not placed within
the probe cover.
- Press the Hold button to retain the
the Hold button again to resume taking
temperature. Please note: Once Hold is
selected the unit will not automatically
turn off.
- Press the Max/Min button to
display the maximum reading and a 'Max'
the Max/Min button again to display the
minimum reading and a 'Min' symbol will
button again to return to normal readings.
To reset, simply hold the Max/Min button
for three seconds. Please note: Max/Min
readings are not saved, so switching off the
instrument will clear these readings.
- Unscrew the battery cover at the end
of the instrument and remove the battery.
To select the desired temperature scale,
slide the switch to °C or °F.
need to be replaced when 'Bat' is displayed
or if the display dims. Replace the battery
with a 3 volt lithium coin cell (CR2032). The
battery is located under the battery cover
at the end of the instrument. Retighten the
battery cover ensuring the gasket remains
in place for continued water resistance of
the product.
- Instrument performance may be
affected if operated within a high frequency
if subjected to an electrostatic shock.
- The instrument
- The battery will
- This instrument carries a
one-year guarantee against defects in either
components or workmanship. During this
period, products that prove to be defective
will, at the discretion of ETI, be either
repaired or replaced without charge. This
guarantee does not apply to sensors/probes,
where a six-month period is offered. The
product guarantee does not cover damage
caused by fair wear and tear, abnormal
storage conditions, incorrect use, accidental
misuse, abuse, neglect, misapplication
available within ETI's Terms & Conditions
of Sale at etiltd.com/terms. In line with
our policy of continuous development, we
reserve the right to amend our product
Advertisement
