richard Solo TY002 Instruction Manual

12000 mAh Portable
Jump Starter / Air Pump /
Power Bank
Model: TY002
INSTRUCTION MANUAL
Battery Layout
Inflator connector port
1
EC5 jumpstart socket
2
USB-A output port
3
USB-C input port
4
LED flashlight / SOS flasher
5
LCD screen
6
Thank you for purchasing the RichardSolo 12000 mAh Portable Jump Starter / Air Pump / Power Bank.
Please read these instructions before operation and save for future reference.
Charge 12000 mAh Power Bank
Connect included USB charge cable (12) to any 5V/2A*
1
USB power source (not included)
Connect USB-C connector to USB-C input port (3) on
2
power bank
Note: Use 5V/2A for best results. Less than 2A will require a longer charge time. For optimum performance, wait until flashing charge icon on LCD
shuts off to ensure full charge capacity. Total charge time (0 - 100%) = about 6 hours.
1
2
3
4
5
6
7
8
9
10
11
Power (ON/OFF)
7
Preset (+)
8
Preset (-)
9
Unit switch / LED
10
Mode switch
11
Included Parts/Accessories
USB-C / USB-A charge cable (not shown)
12
Intelligent jumpstart cables with built-in LED safety module
13
Air inflator hose with connector for vehicle tires
14
3 Inflator hose adapters (ball needle, mattress nozzle, bike
15
tire connector)
Storage case (not shown)
16
LCD charge icon (6) on power bank will flash and show
3
% of charge in power bank
When fully charged (100%) LCD shuts off — Remove
4
charge cable
13
15
14