Prodigy SW-OV User Instruction Manual

User Instruction Manual
Swivel Connector SW-OV
(European Standard: EN 354: 2010)
IMPORTANT
Users must read and perfectly understand the information provided by
the manufacturer before using the devise. If you have questions on the
use, care, application, or suitability of this equipment, please contact
Prodigy Aerial.
PRODUCT DETAILS
These instructions cover the use of the Prodigy Carabiners, conforming
to CE EN362:2004.
This equipment may be used in conjunction with any appropriate item
of Personal Protective Equipment (PPE) relevant to European Union
Directive 2016/425. They may be acceptable for use in other applications,
if in doubt contact Prodigy Aerial: hello@prodigyaerial.com.
WARNING!
Working at height and related activities are inherently dangerous. It is the
responsibility of any person using this equipment to learn, understand and
practice the proper techniques for use of the equipment for its designated
purposes. It is impossible for this document to cover every eventuality
and incorrect use of this equipment may result in fatal consequences.
This equipment should only be used by a competent person or a person
specifically trained in its use. This equipment should not be used by
persons with medical conditions that may affect the safety of the user. You
are responsible for your own actions and any person using this equipment
assumes all risks and full responsibility for all damages or injury which
may result from the use of it. No responsibility will be accepted by Prodigy
Aerial for damage, injury or death resulting from misuse. It is impossible
in this booklet to cover all methods of use. The following instructions and
pictograms show some of the common correct and incorrect methods
of use; it is impossible to predict them all. There is no substitute for
instruction by a trained and competent person. It is essential that a risk
assessment is carried out prior to any use and a rescue plan shall be in
place to deal with any emergencies that could arise during the work. If this
product is resold outside the original country of destination the reseller
should provide these instructions for use in the language of the country in
which the product is sold.
GENERAL GUIDELINES
Immediately before, during and after use, visually/functionally inspect to
ensure that this equipment is in a serviceable condition
and operates correctly. Do a functional check by fully opening the gate
then release -the gate should fully close and self-lock (except screwgate
mechanism). A thorough examination must be carried out at least annually
by a competent person or more frequently depending on local legislation,
intensity of use, or external factors such as temperature, the effects of
chemicals, rust, abrasion or other local damage. All inspections should be
recorded in recorded in an equipment record log similar to the one below.
The user should be aware of its history (use, storage, inspection etc.). If
this equipment is not for personal use (e.g. used in mountaineering cen-
ters), we strongly recommend a systematic approach to record keeping.
This should always be carried out by a competent person. If you are in any
doubt about the safe condition of this equipment, or if it has been used in
a fall arrest it should immediately be withdrawn from use and checked by
a competent person.
GATE MECHANISMS
Screwgate – unscrew then open
Twistlock (double action) – turn then open
Triplelock (triple action) – lift, turn then open
CLEANING, STORAGE AND TRANSPORT
This equipment must not be marked, modified or repaired by the user.
Note: This equipment is not user maintainable with the exception of the
following:
Cleaning: if required clean with a mild household detergent and rinse in
clean water. Thoroughly rinse and dry naturally in a warm ventilated room
away from direct heat. Important: Cleaning is recommended after every
use in a marine environment.
Lubrication: Lubricate the mechanism with suitable light oil. This should be
carried out after cleaning. Cleaning and lubrication may cure a defective
mechanism, if it does not, replace the product immediately. Lubrication
is recommended after every use in a marine environment. Storage and
transport: this product should be stored in a clean, dry environment free
from chemicals or corrosives and away from excessive heat or high
humidity.