Table of Contents
Advertisement
Setting the Record Speed
MENU
1. Press MENU key on the remote control.
OSD
ON
AUTO PLAY
ON
2. Press shift
AUTO REPEAT
ON
RECORD SPEED
EP
VCR OUTPUT CH CH3
INPUT SIGNAL
TV
3. Press select
SHIFT:
SEL:
END:MENU
3. On completion, press MENU key to exit the menu.
Setting the VCR Output CH
MENU
1. Press MENU key on the remote control.
OSD
ON
AUTO PLAY
ON
2. Press shift
AUTO REPEAT
ON
RECORD SPEED
EP
VCR OUTPUT CH CH3
INPUT SIGNAL
TV
3. Press select
SHIFT:
SEL:
END:MENU
3. On completion, press MENU key to exit the menu.
Setting the Input Signal (Entrance to TV Tuner Operation)
MENU
1. Press MENU key on the remote control.
OSD
ON
AUTO PLAY
ON
2. Press shift
AUTO REPEAT
ON
RECORD SPEED
EP
VCR OUTPUT CH CH3
INPUT SIGNAL
TV
3. Press select
SHIFT:
SEL:
END:MENU
4. Press shift
("TV"
5. Press select
Note :
AV1 - Rear A/V Input
AV2 - Front A/V Input
If " TV" or "CATV" is selected, channels will be found and stored automatically.
key, until the cursor is placed in front of the
"RECORD SPEED" option.
key until the appropriate system is selected.
("EP" or "SP")
key, until the cursor is placed in front of the
"VCR OUTPUT CH" option.
key until the appropriate system is selected.
("CH3" or "CH4")
key, until the cursor is placed in front of the
"INPUT SIGNAL" option.
key, then the current input signal mode will be blinked.
key until the appropriate system is selected.
"CATV"
"AV1"
key, to keep selected input signal.
12
"AV2" )
Advertisement
Table of Contents
