Page 2
Notices Before using this product, please read this User Manual carefully and keep it well Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools. device damage. Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
Product introduction Packing list Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor. The color and shape of parts may vary with models. Figures in this User Manual are for reference only. Wires supplied may vary with purchased products.
Installation Installation of base Carton 2. Take out the stand stem and base, and use the thumb screw of the base to lock the stand tightly. Stand Base 3. Put the assembled stand and base components into the slot of the rear casing, slightly press the stand to clip the rotary shaft component into position, hold the middle of the stand with hand to lightly lift the monitor twice to Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.
Page 5
Installation of mount Upper foam cover Lower foam cover 3. Take out the mount adapter from accessories, insert 4 screws into corresponding screw holes at the middle of the rear casing to lock the upper mount adapter and the lower mount adapter respectively, and tighten the screws with a screwdriver (not supplied).
Usage Description of buttons Menu button: Press to enter sub-menus/ quickly enter the main menu Down button: Press to move down in the menu/quickly enter the game crosshair mode Up button: Press to move up in the menu/quickly enter the contextual mode Exit/hot key: Press to return to the previous menu/quickly switch the color format Explanation of indicators Indicator...
Cable connection: with products. * Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department. HDMI interface Use the HDMI-DVI cable to connect the HDMI IN interface Use the HDMI cable to connect the HDMI IN interface of the product to the DVI OUT interface of a PC.
OSD menu Menu description The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed. , E, 1. Press one of the buttons ( ) to activate the browser screen.
Page 10
The function of the display may vary by model. None None Input Source HDMI1 None HDMI2 None Brightness 0-100 Blacklevel 0-100 Brightness/ Contrast Contrast 0-100 O /On Gamma 1.8/2.0/2.2/2.4/2.6 Pictrue Mode Standard/Photo/Movie/Game/FPS/RTS Color Temperature Warm/Cool/USER Color Setting Low Blue Light 0-100 0-100 Saturation...
Need help?
Do you have a question about the SG34-WQ144 and is the answer not in the manual?
Questions and answers