Summary of Contents for Valiant furmates CLOSE TO ME
- Page 1 LUXURY PET BED USER MANUAL IMPORTANT! Please read the instruction sheet carefully before you start assembly and keep for future reference. Find us on: ANOTHER QUALITY PRODUCT DISTRIBUTED BY furmates.com.au valiantbrands.com.au MELBOURNE, AUSTRALIA...
-
Page 2: Important Instructions
IMPORTANT INSTRUCTIONS - Please read the instruction sheet carefully before you start assembly. Keep all packaging materials away from children during assembly. - Remove all components from the carton and ensure that no parts are missing. Please look at the parts list for guidance. In case of missing parts, contact your dealer directly or email us at info@valiantbrands.com.au. - Page 3 FEATURES Release button (hidden beneath the fabric) Comfy pad (sold separately) Securing leg Base Base leg Height adjustment Securing buckle housing Securing belt with anchor End Cap ASSEMBLY INSTRUCTIONS While pressing the button on the end cap, Simultaneously pressing the two side push it firmly and fully into the open end release buttons, lift the bed assembly of each securing leg.
-
Page 4: Frame Assembly
FRAME ASSEMBLY Push each end of the bed frame base into Insert the vertical tube into the housing the corresponding housings in the leg on the underside of the top tube at the support until they engage firmly into place. rear of the pet bed till it is firmly engaged in place. -
Page 5: Height Adjustment
HEIGHT ADJUSTMENT Remove your mattress and place the pet bed with the securing legs on the bed frame, beneath where your mattress would be. Push the button to release the support leg and pull it outward perpendicular to the floor. Adjust the length of the support leg by lifting the height adjustment button and simultaneously moving it in the desired direction until it makes firm contact with the floor. - Page 6 ATTACHING TO YOUR BED Install the securing belt by inserting the fastener into the corresponding buckle housing on the pet bed frame. Adjust the belt length to suit your bed frame width by lifting the locking buckle and then pulling the strap in the desired direction. Close the buckle to secure the correct length.
- Page 7 TO FOLD Lift the height adjustment button upwards and shorten the length of the Close to Me support leg. Push the release button to fold the support leg as illustrated. LIFT Push the two buttons on either sides of the Close to Me bed and fold down.
- Page 8 furmates.com.au...