Summary of Contents for Green-Box Technology Monitored PDU Series
- Page 1 Monitored PDU Series Switched PDU Series User Manual ◄ V1.0 ► www.green-box.com.tw www.data-av.com...
- Page 2 RoHS. © 2009 by Green-Box Green-Box Technology Co. Ltd. reserves the right to make changes in the hardware, packaging, and any accompanying documentation without prior written notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,...
-
Page 3: Table Of Contents
Contents 1. Introduction .................. 1 2. PDU Package ................. 2 3. Functions ..................3 4. Installation ................... 4 5. Web Interface ................6 6. Specification ................. 9 7. Remarks…….………………………………………………..………………..……10 8. Notice………….………………………………………………………………..……10... -
Page 4: Introduction
Monitored and Switched PDU Series 1. Introduction The PDU (Power Distribution Unit) is an Internet ready device designed and is equipped with an intelligent current-meter (True RMS) that will indicate the total power consumption of a power strip. The PDU offers an easy set up and user-friendly communication software. This software provides the function that assistant manager to remotely monitor the multiple PDU power consumption to realize the total current power consumption and utilization for the enterprises. -
Page 5: Pdu Package
Monitored and Switched PDU Series 2. PDU Package The standard PDU package contains a Power Distribution Unit with supporting hardware and software. The components of the package are: Power Distribution Unit. Rack mount Brackets. CD-ROM, it contains: User Manual. PDU Software. MIB: Management Information Base for Network. -
Page 6: Functions
Monitored and Switched PDU Series 3. Functions Interface Type A: Support 1 PDU with single power bank. Type B Support 1 PDU with 2-4 power bank. No. Functions Description Ethernet The Network connection for the built-in web server. Audible Warning- 1 beep in 1 second Alarm Overload- 3 beeps in 1 second Note:... -
Page 7: Installation
Monitored and Switched PDU Series 4. Installation This section will instruct you to quickly install the PDU. Rack Mount Instructions A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. - Page 8 Monitored and Switched PDU Series Hardware 1. Install mounting brackets. The PDU comes with brackets for mounting in a rack. To mount the PDU into a rack performs the following procedure: Attach the mounting brackets to the unit, using the four retaining screws provided for each of the brackets.
-
Page 9: Web Interface
Monitored and Switched PDU Series 5. Web Interface Web: Provide a quick checking interface for the status of PDU. Index: System Information Provide the General Information for the PDU, including: • Model No. • Name • Location • Contact • Version •... - Page 10 Monitored and Switched PDU Series Network: 1. Provide the network information for the PDU. 2. User can change the network setting here. * The default ID is snmp and password is 1234. Change the ID and password. * The default ID is snmp and password is 1234.
- Page 11 Monitored and Switched PDU Series Trap: 1. Send the event trap to the specific IP to alert manager. Default ID is snmp Password is 1234. 2. If you need the PDU utility forward the TRAP and the log to syslog server, please input the IP that installed the utility as “Receive IP”.
-
Page 12: Specification
Monitored and Switched PDU Series 6. Specification Interface RJ45: Ethernet Nominal Input Frequency: 50/60Hz Full Range LED Indicator Indicator: (1) yellow LED ; (1) red LED Current Meter: 3 digits Range: 0AMP~20AMP (True RMS) Resolution: 0A~20A: 0.1A Precision: 0A~20A: +/-2%+/-0.1AMP Alarm Audible: 1. -
Page 13: Remarks
Monitored and Switched PDU Series 7. Remarks Please read this operation manual carefully before operating the device. II. To prevent potential power damage do not use 2-wire extension cords. Ensure DC outlets at PCs and displays are on the same phase and have correct and common grounding.
Need help?
Do you have a question about the Monitored PDU Series and is the answer not in the manual?
Questions and answers