Summary of Contents for KRAFTWERK 30002
-
Page 1: Safety Recommendations
KRAFTWERK Video Endoscope 1 GB Memory 3m insertion tube Your dealer: Art. 30002 www.KRAFTWERK.eu Please read these instructions carefully to ensure the safe and effective use of this tool. Instructions can be downloaded: www.kraftwerk.eu... -
Page 2: Table Of Contents
This may cause the data to be lost or the card to be damaged. EC Declaration of conformity We, KRAFTWERK Europe AG, Mettlenbachstrasse 23, 8617 Moenchaltorf, Switzerland declare that the KRAFTWERK Endoscope Art. 30002 is designed and manufactured with the EMC standards:... -
Page 3: Description
The 30002 is supplied in a sturdy carrying case and consists of a display unit, insertion tube, main adapter and side view adapter. The display unit, with a 3,5” wide angle TFT LCD screen, has the capacity of viewing, storing and reviewing photos and video images. -
Page 4: Preparation For Use
The status screen shows the capacity of the SD card and the internal battery. If the 30002 has been stored for a long time then the display might not turn on. The most likely cause is that the internal batteries have been fully discharged. Use the power adapter to recharge the batteries. -
Page 5: Menu Set Up
It is strongly advised to properly set-up the 30002 before first use. The indexing of saved photos and videos is based on date and time only. Other parameters, if set before first use, can make the operation of the 30002 easier in the future. -
Page 6: Recording, Viewing And Transferring Photos And Videos
Language Navigate to LANGUAGE in the menu, press the OK button. Select the required language using the UP or DOWN buttons and confirm with the OK button. Video Format Navigate to VIDEO FORMAT in the menu, press the OK button. Select the required video format (NTSC or PAL) using the UP or DOWN buttons. -
Page 7: Troubleshooting
5. Troubleshooting No image on the display after turning the power on: Battery is exhausted. Connect the display unit to the power adapter supplied and recharge batteries. The 30002 can be used when connected to ac power. No image, only words on the LCD monitor after turning the power on: Check that the insertion tube is correctly connected to the display unit. -
Page 8: Technical Data
LCD screen, TV Out, transfer of picture & video from SD card to PC Customer services Contact your local importer of your specialized dealer to obtain address of your service department. www.kraftwerk.ch You find our partners under From date of purchase receipt 2 YEARS GUARANTEE...