Page 2
Plug-and-Play installation directly into the vehicle OBD-II port, the device is always connected to relay vehicle and driver information back to you through the M2M in Motion web and mobile app. HIGHLIGHTS: •...
Page 3
FEATURES • Trip history with video replay • Parking motion sensing and recording in Guard Mode • Web and mobile applications supported • Unauthorized tamper and power disconnect notification • Audio Streaming (on/off) enables audio from the camera embedded mi- crophones when streaming live or historical video footage in the Web App.
• The 256 GB SD cards are shipped separately in the camera box you will need to insert the provided SD card into DCRCCAM1. * The SD card slot is located on the bottom right hand side of DCRCAM1 1. After inserting the SD & SIM card into the camera’s small slot as seen...
A-pillar into the drivers’ dashboard area near the factory OBD II port and plug the DCRCAM1 connector into the OBD II port. STEP 4: Secure the excess power cable extension into the headliner or under the dash area with the mounting adhesive tabs included with the camera.
Page 7
5 minutes allowing time for the DCRCCAM1 to communicate with the vehicle’s network. 2. Login into the M2M account and confirm the vehicle is tracking and video is streaming.
Page 8
Configuring your New Dash Camera: Many custom configurations can be made to the DCRCAM1 camera via the M2M in Motion web application or mobile APP. USER Configurable options • Audio - Enable/disable audio recording and streaming • Cameras - Enable/disable the road- or cabin-facing cameras •...
Page 9
Default setting is both cameras are enabled. Contact your M2M Sales or Tech Support for the other configurations. email | support@aampglobal.com tel | 727-732-2727...
727-732-2727 Display shows no SD Card: The DCRCAM1 is shipped with a specific class 256 MB sd card that needs to be inserted into the camera, if the card is inserted but not showing-Power off the camera by turning off the vehicle’s ignition or pressing the power reset...
Page 11
All passenger vehicles built in 2008 + that have a working CANBUS communi- cation port (OBD II) have the ability for the DCRCAM1 to read vehicle informa- tion like DTC codes, Feul, speed, RPM. If the camera display is black the may be an issue with your vehicle please contact support to validate the installa- tion and help resolve it.
DCRCAM1 TECHNICAL SPECIFICATIONS 140-degree field of view Sony STARVIS CMOS sensor Road Facing Camera 1080p recorded video 720p live streaming video 130-degree field of view Omni Vision CMOS sensor 720p recorded video Cabin Facing Camera 720p live streaming video High-quality infrared night vision sensor...
Page 13
Connectivity Bluetooth, BLE OBD-II CAN Bus USB (Micro-B) Powered by the OBD-II port with intelligent power management Power Backup battery if DCRCAM1 is unplugged Height: 2.0″ Width: 1.1″ Size: Length: 7.75″ Weight: 0.37lbs 16GB Internal storage Storage MicroSD card slot up to 256GB...
Page 14
CONTACT US m2mfleetmotion.com IUG_DCRCAM1 REV031422...