HAMPTON BAY 1000 000 000 Use And Care Manual page 12

Drawer Box Assembly (continued)
3
Attaching the drawer back
□ Use a rubber mallet to tap the drawer back (I) into place.
To fit the drawer back on, drawer sides will have to flex
outwards slightly.
□ Insert four more screws (BB) into the countersunk holes on
each side. Fully tighten all eight screws.
4
Attaching the drawer glide
attachments
□ Install two drawer glide attachments (EE) to the drawer.
Secure each attachment in place with the screws (GG)
packaged with the drawer glide attachments (EE). Make
sure each glide attachment (EE) is secured fully underneath
each corner.
I
BB
G
EE
GG
12
GG