Page 2
We have designed and manufactured this Compact Disc player to reproduce your favourite music faithfully and accurately. With a little care and a full understanding of the operating recommendations in this manual, your Plinius CD101 Compact Disc Player will provide years of high-quality, trouble-free performance.
DESIGN PHILOSOPHY From a distance you can see that the design of the Plinius products is more than an applied styling exercise to the front panel. We have started from the ground up to produce a casing for our electronics that is unrivalled in its physical strength and visual simplicity.
CD Player Features – Rear Panel ... Page 8 CD Player Features – Remote Control ... Page 10 Installation and Operation ... Page 12 Output Connection ... Page 13 CD101 Features ... Page 14 Specifications ... Page 15 Index ... Page 16 Contact Details ... Page 17...
Please take special note of the following precautions before operating your new Compact Disc Player: • This Compact Disc player operates at hazardous voltage levels. We recommend that any work requiring removal of the lid be referred to a suitably qualified and experienced service technician. •...
CD P LAYER REPEAT Front Panel Layout Showing CD Drawer, Button, POWER LED A blue LED on the centre front panel indicates that the power is on. When first switched on, the display LED will vary in brightness until the initialisation sequence is completed, after which the LED remains lit. COMPACT DISC DRAWER The CD is inserted in this drawer, which is controlled by the Stop/Eject button.
Page 7
Compact Disc with 20 tracks or less: The LED labelled 1 will be lit, as will the LED corresponding to the last track on the Compact Disc. This gives a visual representation of the total tracks on the Compact Disc. Every fifth LED in between will also be lit, to make reading the display easier from a distance.
This panel incorporates all the terminals for connecting the output signal to your preamplifier, AV receiver or integrated amplifier, and mains supply. Please remember that your Plinius CD101 Compact Disc Player is a high quality electronic instrument capable of an exceptional level of performance. Be sure that you understand your system’s requirements fully before you make any connection to this Compact Disc player.
Page 9
MAINS SWITCH The heavy-duty rocker switch turns the Mains/Line Power to the amplifier ON or OFF. The amplifier draws a moderately high current when switched on, so it is not good practice to rapidly turn the Mains switch on and off repeatedly. MAINS POWER CORD IEC SOCKET This connector is where the mains supply cable from your wall connects to the Compact Disc player.
REPEAT Press this button and the repeat light on the front panel will light. The CD101 will now play all tracks on the Compact Disc as normal, but then repeat all tracks from track 1 in an endless loop. It does not repeat one track only, it repeats the entire contents of the Compact Disc.
Page 11
Pressing this button toggles a Plinius integrated amplifier or preamplifier in and out of mute. Note that this button does not control the CD101 Compact Disc Player, and is included only to remove the need for two remotes, if more than one Plinius product is in your system.
NSTALLATION AND PLACEMENT AND VENTILATION Ventilation through and around your Plinius CD101 Compact Disc Player should be kept unimpeded, so ensure that the heat vents (slots in the lid) are not covered or restricted in any way. The Plinius CD101 design incorporates a very high level of mechanical de-coupling of the outputs.
Connect a pair of RCA inputs from your preamplifier or integrated amplifier to the RCA outputs on the back of the Plinius CD101. Make sure you connect the red coded cable to the red RIGHT RCA input, and the black (or white) cable to the black LEFT RCA input. Also make sure the RCA connectors are a snug fit and are inserted all the way in.
Should the Compact Disc player continue to suffer mains fuse failure, contact your PLINIUS dealer. COPY PROTECTED COMPACT DISCS Please understand that the CD101 has been designed to meet the standards as laid out in the Redbook CD specification. Copy protected CDs do not conform to this standard, and are manufactured with deliberately introduced errors in an attempt to frustrate those who may want to make digital copies.
PECIFICATIONS : 20Hz to 20kHz ±0.2dB. REQUENCY ESPONSE : <0.01% THD at rated input level. ISTORTION & N : -100dB at rated input level, A Weighted. OISE : 2V RMS into 10kΩ or higher. AXIMUM UTPUT EVEL : Typically 100Ω. UTPUT OURCE MPEDANCE...
Need help?
Do you have a question about the CD-101 and is the answer not in the manual?
Questions and answers