Erasing A Memory Location - Sony SPP-S9101 Operating Instructions Manual

Phone Directory (continued)
3
Turn Jog Dial up to make "EDIT" flash and
press Jog Dial.
The cursor flashes at the last character of the
name.
4
Turn Jog Dial down to erase the characters and
enter the new name.
If you want to change only the number, skip this
step.
5
Press Jog dial.
The cursor flashes at the last digit of the phone
number.
6
Turn Jog Dial down to erase the number and
enter the new number.
If you don't want to change the number, skip
this step.
7
Press Jog Dial.
You hear a long confirmation beep and the
name and/or the number is changed.
Tip
When the phone number of 17 digits or more has been entered, "–" is displayed
next to 15th digit and then the all digits are displayed in two lines after about
two seconds.

Erasing a memory location

1
Display the name and phone number you want
to erase by doing steps 1 and 2 on page 25.
2
Press Jog Dial.
3
Turn Jog Dial up to make "ERASE" flash and
press Jog Dial.
4
Turn Jog Dial up to make "YES" flash, then
press Jog Dial.
You hear a long confirmation beep and the
memory location is erased.
US
24
Telephone Features
SON Y
1234567
SMITH
1234567
SONY
1234567
DIAL EDIT ERASE
1234567
ERASE NO YES
1234567