Summary of Contents for Itek YS-BF01
- Page 1 YS‐BF01 (STK‐12/1963) Smart Track & Find INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1 ...
-
Page 2: Getting Started
Thank you for choosing itek™ Smart Track & Find. It can chase your easy‐lost & valuable belongings (such as keys, wallet, luggage and more) with smart phones through specified App software within a preset Bluetooth connection distance. Getting Started Remove the device from the box. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. ... -
Page 3: Specifications
Specifications Bluetooth version: Bluetooth 5.0 Low Energy Size: Length 1.50 inches (38.1 mm), Width 1.50 inches (38.1 mm) and Height 0.28 inches (7.0mm) Compatible Phone: iPhone 13/13 Pro/13 Pro Max/13 mini/12/12 Pro/12 Pro Max/12 mini/11/11 Pro/11 Pro Max/XS/XS Max/XR/X/8+/8/7+/7/6+/6 or above, iPad 5th/4th, iPad mini, iPad Air, iPod touch (iOS 9.0 or above, and with Bluetooth 4.0) Samsung Galaxy S22/S21/S20/S10/S9/S8/S7/S6/S5 or later, NOTE 4/5/8/9/10, LG Nexus 5 (Android OS 9.0 or above, and with Bluetooth 4.0) Working distance: About 33‐66 Feet (without barrier) Suitable for: Wallet, Car, Bags, Suitcase or other belongings Battery: CR2032/CR2032H battery Standby time: About 6 months Net weight (with battery inside): 0.3 oz (9g) ... - Page 4 3. Secure back the top cover. Instructions for Use Switch on/off the unit For the first time use, pull out the battery insulating film. Switch on: Press and hold the camera button for 3 seconds until you hear two “Beep” sounds. Switch off: Press and hold the camera button for 3‐5 seconds until you hear long “Beep” sound. Connection 1. Turn on the Bluetooth on your smartphone, and open the software App. 2. Smart Tag will connect the smartphone automatically when power on. 3. Click the button “+” on the top right corner to find more connectable Smart Tag devices, such as car keys, bags and so on. Click the “Unconnected” button to connect it, then, it will show “Click Alarm” and battery level. [Note: Click the “Setting” button will turn to submenu, such as add photo for Smart Tag, rename, get actual alarm when Bluetooth disconnected (i.e. when Smart Tag and your smartphone is out of Bluetooth’s range) and select the ringtone (i.e. alarm sound).] 4 ...
- Page 5 4. To delete a device, just scroll left the list to delete it. 5 ...
- Page 6 Do Not Disturb Mode On the “Settings” interface, switch “WIFI Do Not Disturb” on, alert function of all devices will be shut down. Setting for Alarm As shown in below image ‐ 1. Double click the camera button on Smart Tag to trigger the alarm on the smart phone. 2. Click the “OK” button to stop the phone alarm. 6 ...
- Page 7 3. Click “Click Alarm” button, Smart Tag starts an alarm, and click the “Stop Alarm” will stop the alarm from Smart Tag. Camera As shown in below image ‐ Press the “Camera” button, it will turn to camera mode. Press to switch the front and rear camera. Press the camera button on Smart Tag once, it works as a remote shutter to take photo. 7 ...
- Page 8 Location As shown in below image ‐ Lost History: If the Smart Tag is lost, a pin‐drop will be marked automatically on the Map to tell you the site it was lost. Just click “Lost History” to find the record. 8 ...
- Page 9 Setting In order to experience the functions of Smart Tag better, enter into the settings menu to set your Smart Tag. As shown in below image ‐ Silent Period: Set the silent time for not receiving alarm. Double click recording: Only available on iOS device. Turn this function on, double click the camera button on Smart Tag to start recording, and double click again to finish and store the record file. Simply press > button to see the record files and click the file to play. Version: Version of current software App. Care and maintenance Read the following recommendations before using the unit. Following these you will be able to enjoy the product for many years. Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Don’t use abrasive cleaning solvents to clean the unit. 9 ...
- Page 10 Do not expose the unit to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t dispose of the unit in fire as it will result in an explosion. Don’t expose the unit to contact with sharp objects as this will cause scratches and damage. Don’t let the unit fall down onto the floor. The internal circuit might get damaged. Don’t attempt to disassemble the unit as it may get damaged if you are not professional. FCC Instructions Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable ...
- Page 11 LIMITED WARRANTY This manufacturer's product warranty extends to the original consumer purchaser of the product. Neither the retailer nor any other company involved in the sale or promotion of this product is a co‐ warrantor of this manufacturer warranty. WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser for a period of ninety (90) days from the original purchase date. ...