Troubleshooting; Warranty; Dimensions - Haier HB WH-Filter M10 Manual

Troubleshooting

Fault
Unit is not providing water
or too low a flow rate.
Dyed flushing water during
the start-up.
If the fault cannot be rectified with this troubleshooting guide, our customer service team must be contacted, providing
information of the series and production number (see type label of the unit).
Service notification
433 L
POS
TBD
Para

Warranty

If the product malfunctions during the warranty period, contact your contract partner, the installation
company, and quote the unit type and production number (see technical specifications or the type
plate on the unit).
Non-compliance with the installation conditions and the operator responsibilities leads to the loss of
warranty and exclusion of liability.
The wearing parts defined in the "Operator responsibilities" section and the consequences of
failing to replace these parts on time are not covered by the two-year legal warranty.

Dimensions

HB WH Filter
Height
Connector height
Diameter of tank
Clearance
Primary pressure too low.
Abrasion particles of the
When the litre display begins to flash, it is time for a service, because 150
regenerations are reached. Please contact customer service.
Error with power monitoring of the magnetic valves
Typ
A
mm
B
mm
C
mm
D mm
C
Cause
filter materail.
Motor position error
Please contact customer service.
Please contact customer service.
Storage error
Please contact customer service.
HBCF-C1002 HBCF-C2002
625 1080
485 940
208 254
500
800
11
Rectification
Increase primary pressure (adjust
pressure reducer if required) and
activate manual regeneration.
Repeat start-up flushing.
HBCF-C3002
1280
1145
254
800