Subscribe to Our Youtube Channel
Related Manuals for Swimline HYDROTOOLS 71610
Summary of Contents for Swimline HYDROTOOLS 71610
- Page 1 71610 / 71915 / 72220 / 72420 FULLY INTEGRATED SAND FILTER, PUMP, PRESSURE VALVE & STAND INSTRUCTIONS...
- Page 2 SAFETY INFORMATION: 1． Sand lters are designed to work with water temperatures between 33.8°F and 113°F (1°C - 45°C). The lter should never be operated outside of these temperatures or damage may occur. 2． The installation should be carried out in accordance with the safety requirements of the swimming pool industry and the speci c requirements for each application.
- Page 3 Insert the laterals and turn 90°clockwise. After hearing the locking sound, the lateral is well installed. Please refer to the following picture on the right. 3． Check that the air release hose (Part# 5 / Item# 71624, 71924, or 72224; on Pg. 5). is xed well on the body of lateral holder, and that the other end of the air release hose is out of the sand.
- Page 4 HOW TO USE: Prior to setting up the lter system, ensure that the pump is o , as failure to do so will cause spider valve to malfunction and damage top mount valve. Pump must be o anytime valve handle is depressed and moved to any of the various functions. 1．...
- Page 5 Qty. Ref.No. Part No. Description 71622 Sand Filter Support for 71610,71915,72220,72420 71604 Drain plug for 71610,71915,72220 ,72420 71608 Lateral for 71610,71915,72220 72408 Lateral for 72420 71603 Center Pipe for 71610 71903 Center Pipe for 71915 72203 Center Pipe for 72220 72203 Center Pipe for 72420 71624...
- Page 6 · Recomendamos que su uso sea en ciclos de tiempo no consecutivos, no más de 6 a 8 horas por ciclo. · No lo utilice en horas pico, maximice su ahorro con un temporizador que aproveche los tiempos de menor demanda de electricidad. HYDROTOOLS by Swimline / ILP 191 Rodeo Drive, Edgewood, New York 11717 Tel: 1.631.254.2155 • Fax: 1.631.254.2363 Email: info@swimlinecorp.com...
Need help?
Do you have a question about the HYDROTOOLS 71610 and is the answer not in the manual?
Questions and answers
How do you get the top of the valve head off to change the spider gasket?
To remove the top of the valve head on a Swimline 71610 to change the spider gasket, follow these steps:
1. Turn off the pump to prevent damage to the valve.
2. Make sure the system is not under pressure.
3. Remove the thumb screw plug to access the gauge connection point.
4. Unscrew and remove any screws or clamps securing the top of the valve head.
5. Lift the valve cover carefully to access the spider gasket inside.
Ensure all connections are properly reassembled after replacing the gasket.
This answer is automatically generated