Subscribe to Our Youtube Channel
Summary of Contents for Ekselans CAM B3
- Page 1 USER MANUAL CAM B3 263035 Outdoor WIFI IP CAMERA with 2MPX ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 · info@ek.plus · www.ek.plus...
-
Page 2: Table Of Contents
CAM B3 USER MANUAL TABLE OF CONTENTS Features................................................. 3 Contents of the box........................................3 Parameters..............................................3 Installation Guide............................................ 4 Camera configuration......................................... 5 Access to live video feed........................................ 8 Camera settings............................................9 Accessory settings.......................................... 9 Network configuration. -
Page 3: Features
CAM B3 USER MANUAL Features. Designed for use with alarm systems, the Smart Camera is a wireless, Internet-enabled camera with excellent performance. Its lightweight and attractive design is perfect for use in an office or home environment. This IP camera is easy to set up and operates via an app for mobile devices. Using international servers worldwide, users can easily view recorded or live video anywhere, anytime from a phone. -
Page 4: Installation Guide
CAM B3 USER MANUAL Installation Guide. Install the micro SD card into the camera (Optional). Remove the cover by removing the screws. Insert the micro SD card that is to be installed, which can be up to 128GB. Be careful to position... -
Page 5: Camera Configuration
CAM B3 USER MANUAL Camera configuration. To configure the camera, it must be disconnected from the LAN cable. Only the first configuration can be made using the Wi-Fi. Open the SEKUR IP application and go to “Device settings” (in the image it is the wheel). - Page 6 CAM B3 USER MANUAL The following screen will appear. It indicates the password (01234567) and the SSID of the camera which must be connected. Connect to the SSID of the camera to be installed. Once connected click on the back arrow and select “Maintain configuration”...
- Page 7 CAM B3 USER MANUAL Once finished go to the settings wheel of our application and in devices the added camera should appear, then access “IP Camera”. When accessed, the cameras which have been added will appear. Click on the exclamation mark to configure a password for the camera.
-
Page 8: Access To Live Video Feed
CAM B3 USER MANUAL Access to live video feed. Go to the “Device settings” menu of the Click on play in the camera that is to be viewed. installed cameras. WARNING IT MUST BE IN CONNECTED STATE In the playback there are different options available: Current date and time of the camera. -
Page 9: Camera Settings
CAM B3 USER MANUAL Camera settings. Accessory settings. Go to the “Device settings” where the Click on the name of the camera that is to be cameras are installed. configured. Accept button: Whenever a change is made in the configuration it must be accepted so that it is applied completely. -
Page 10: Ip Camera Settings
CAM B3 USER MANUAL IP Camera settings. Details: The status of the camera, as well as the password that was configured upon first installation can be seen. This password can be changed from this same menu by clicking on it. -
Page 11: Motion Detection
CAM B3 USER MANUAL Motion detection. Motion Detection: Enables activating motion detection. For the images to be recorded, the recording must be activated. Camera Alarm Scheduling: Enables activating a time in which the recording will be triggered when motion is detected. -
Page 12: Playback Of Images Recorded On The Sd Memory
CAM B3 USER MANUAL Playback of images recorded on the SD memory. Go to the “Device settings” menu where the Click on “Video” for the camera that is cameras are installed. to be viewed. The recording screen where the timeline can be browsed to view the recordings made will be displayed. -
Page 13: Faqs
CAM B3 USER MANUAL FAQS I have already connected the camera to the Internet, but I cannot connect it to the application. Check that you have used the QR code during synchronization. Check that you are using 2.4 GHz Wi-Fi, the camera cannot support 5 GHz.
Need help?
Do you have a question about the CAM B3 and is the answer not in the manual?
Questions and answers