bitmore e-Pro Power 10K User Manual page 3

BITMORE GUARANTEE:
Please keep your proof of purchase/receipt and visit bitmore.co.uk
for information on our 24-month guarantee.
Charging the e-Pro Power 10K:
1. Plug a cable into the USB port on the e-Pro Power 10K, connect the other end to a mains adaptor
(not supplied) or USB port.
OR
Plug a Micro USB into the Micro USB port on the e-Pro Power 10K and connect the other end to a mains
adaptor (not supplied) or USB port.
The e-Pro Power 10K is fully charged when all 4 LED indicators
are illuminated.
Note: Only use a 5.0-5.5V adaptor to charge the e-Pro Power 10K.
Tip: Using a mains adaptor will charge the e-Pro Power 10K more quickly.
Wired Charging:
Plug the correct integrated cable into your device, charging will begin automatically.
Plug your own charging cable into the USB port on the e-Pro Power 10K, charging will begin automatically.
Wireless Charging:
1. Remove any cases from your device.
2. Place your Qi wireless enabled device on the secure suction wireless charging area, charging will
begin automatically.
The e-Pro Power 10K will turn off automatically when if you don't connect a device within 30 seconds,
or if you double press and hold the power button.
BM-ECPB10QI E-PRO POWER 10K | 2