Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Aseko ASIN SALT
- Page 1 Salt Water Electrolyzer ASIN SALT User’s manual...
- Page 2 Installation ASIN Salt is installed on a wall in the distance of max. 1.5 m from the electrolyzer, which is installed in the circulation pipeline. With the electrolyzer ASIN Salt is interconnected with a cable that is a fix part of the electrolyzer.
- Page 3 Fig.1. Connection of the ASIN Salt to the filtration circuit Connection to ASIN Aqua S Power supply Fuse for electrolyzer T1.6 A / 250 V Earthing 230 V, 50 Hz Fig. 2. Electric connection of ASIN Salt ASEKO s.r.o., Vídeňská 340, 25242 Vestec u Prahy Tel.
- Page 4 We recommend you to put the system in operation in clean chlorinated water. ASIN Salt only starts to produce sufficient quantities of the disinfection agent in a few hours. As for the first chlori- nation the need of the disinfection agent is significantly higher than during stable operation, it may happen that ASIN Salt will not achieve the required concentration of the disinfection agent.
- Page 5 Never switch ASIN Salt on unless at least 2 g of salt per litre of water are dissolved in the pool water. The electrodes would get damaged. The optimum level is 4 - 7 g / litre.
- Page 6 Guarantee The manufacturer is liable for defects of the ASIN Salt equipment and electrolytic cell for 2 years from the date of sale. If this date is not credibly evidenced, the guarantee period starts on the production date indicated on the pro- duction label.
- Page 7 Water has the correct pH parameters and content of salt The electrolytic cell is clean There is a sufficient water flow through the electrolytic cell The fuse of the device is OK. ASEKO s.r.o., Vídeňská 340, 25242 Vestec u Prahy Tel. 244 912 210 Fax 244 910 800 aseko@aseko.cz...
Need help?
Do you have a question about the ASIN SALT and is the answer not in the manual?
Questions and answers