Fineart FINE 2000BEAM Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

http://en.fineart-light.com

Contents...........................................................................1

FINE2000/2500 BEAM measurement.....................................3

Introduction...................................................................... 4

Safety direction...................................................................4

Protection from burst............................................................4

Protecting against electric shock............................................ 4

Protecting against ultraviolet radiation or lamp explosion............. 5

Protecting against burning or fire............................................ 5

Protecting against injury due to falls.........................................6

Transportation...................................................................6

Included accessories............................................................6

Transport locks................................................................... 7

Single package................................................................... 7

Lamp................................................................................. 7

Lamp information................................................................ 7

Lamp replacement.............................................................. 8

AC power supply..............................................................10

Fuse............................................................................... 10

Power supply adjustment...................................................... 10

Power consumption............................................................. 10

Data..................................................................................12

Fixtures connection............................................................12

Data connection................................................................ 12

Rigging............................................................................13

Clamping the fixture to a truss.............................................. 13

Controlling panel...............................................................14

DMX address and setting.....................................................14

FINE2000/2500 BEAM function description...........................15

P/N 399903650603

Version C

- 1 -

Table of Contents

Need help?

Do you have a question about the FINE 2000BEAM and is the answer not in the manual?

Questions and answers

Summary of Contents for Fineart FINE 2000BEAM

Page 1: Table Of Contents
Contents Contents………………………………………………………………...1 FINE2000/2500 BEAM measurement……..………………………..3 Introduction….………………………………………………………… 4 Safety direction…………………………………...……………..4 Protection from burst...…………………………………………………4 Protecting against electric shock………………………….…………. 4 Protecting against ultraviolet radiation or lamp explosion…..…….. 5 Protecting against burning or fire…………………….………………. 5 Protecting against injury due to falls.…………….…………………...6 Transportation……………………….…………………………………6 Included accessories…………..……………………………………….6 Transport locks….………………………………………………………...
Page 2 Distributor /Manufacture will not be responsible for any trouble or damage because of wrong operations. The products and feature will be updated without notice in advance. Regarding newest software, hardware and file information, please visit http://en.fineart-light.com. - 2 -...
Page 3: Fine2000/2500 Beam Measurement
FINE 2000/2500 BEAM measurement - 3 -...
Page 4: Introduction
Introduction Thanks for purchasing FINE 2000/2500BEAM product. Adopted 1200W/1500W metal halide lamp this Moving Head with professional CMY color mixing system and color temperature correction(CTC) has been designed and made with total quality to ensure excellent perfor- mance and best meet your expectations and requirements.
Page 5: Protecting Against Ultraviolet Radiation Or Lamp Explosion
Always keep earthing connection.  Make sure that the main power supply you use is up to local construction and electronic code regulation, the over-load protection and reliable earthing are essential.  Do not make the equipment expose in the rain or in the moist environment.
Page 6: Protecting Against Injury Due To Falls
Protecting against injury due to falls  Do not lift or carry the fixture by one person.  To inspect that the truss hooks are in good condition and can bear about 10 times weight of the fixtures. ...
Page 7: Transport Locks
Figure 2: single package Figure 1： Pan and tile lock Transport locks Head and arms can be locked for transportation or service, refer to the lock as figure 1, unlock it before operating the fixture. Single package Unpacking the fixture 1、...
Page 8: Lamp Replacement
FINE 2000 product with electronic ballast. The ends of the lamp have unique keys, shown in Figure 4. To ensure proper installation, do not use other lamps without SFC 10-4 key. Warning! Installing any other lamp may damage the fixture.
Page 9 2、 Refer to figure 3, open the 1/4 turn fastener on the back of the control panel, and draw back the lamp holder. 3、 Refer to figure 4, To disassembly the lamp, loose the poles of the lamp with a screwdriver from the socket, then pull out two poles one by one respectively.
Page 10: Ac Power Supply
IN-OUT adjustment screw clockwise until the light is bright and evenly distributed. AC Power supply Warnin! For protection from electric shock, the fixture must be earthed. The AC mains supply UP-DOWN shall be fitted with a fuse or circuit breaker and IN-OUT ground-fault protection.
Page 11 FINE 2000/2500 BEAM green energy mode The fixture provides the function of auto lowdown power consumption. When dimmer is off or CMY filters overlapped entirely up to more than 5 seconds, amp power will low down 50%. That can prolong the lamp life and protect the filters and save power.
Page 12: Data
Data Important! Never exceed 1 data input and 1 data output connection. FINE 2000/2500BEAM has 3-pin connector and 5-pin connector for DMX input and output, pin 1 is for earth connecting, pin 2 is for negative pole connecting and pin 3 is for positive pole connecting.
Page 13: Rigging
Rigging FINE 2000/2500 BEAM can be stamped to a truss in any orientation. The fast-lock system enables quick and easy fastening of the clamp brackets in 4 positions as shown in Figure 8. Figure 8: Clamp bracket positions Warning！...
Page 14: Controlling Panel
1/4 turn clockwise to lock. Install the second clamp. 4. If the truss can be lowered, fixtures can be clamped on directly from flight case. If the fixture must be lifted, block should be put under the working area.
Page 15: Fine2000/2500 Beam Function Description
Refer the menu control on the Users manual to fixture personnel setting. FINE 2000/2500 BEAM function description Color The color mixing system uses continuous dichroic cyan, magenta, and yellow (CMY) color filters. It is a subtractive system that removes color from white light.
Page 16: Auto Focus
Auto-focus Zoom lens beam angle: spot light 4.2° , soft light 9° -22° Pan and Tilt Pan 540° , tilt 255° , for maximum positioning accuracy, select 16-bit mode. The pan/tilt speed (fast, norm, or slow) may be selected on the pan/tilt speed channel.
Page 17 Channel 15：Pal/Tilt macro speed (Reserved) Channel 16：pan rotating (8bit) Channel 17：pan rotating (16bit) Channel 18：tilt rotating (8bit) Channel 19：tilt rotating (16bit) Channel 20：pan、tilt、speed adjustment Channel 21：effect speed adjustment 25 Channel function： Channel 1：Open、strobe、reset Channel 2：dimmer Channel 3：CMY cyan Channel 4：CMY magenta Channel 5：CMY yellow...
Page 18: Dmx Channel
DMX channel Start code=0 21-channel 25-channel Value percent Function 0-19 shutter，strobe，reset， 20-49 on/off 50-72 Shutter, close 73-79 0-17 open 80-99 8-19 Strobe fast to slow 100-119 20-28 Shutter open 120-127 29-31 Strobe fast to slow 128-147 31-39 Strobe fast to slow...
Page 19 0-255 0-100 Cyan white→cyan CMY color mixing 0-127 0-50 At least 0-100% 128-255 50-100 At most 0-100% 0-100 Magenta white→magenta CMY color mixing 0-50 0-255 At least 0-100% 50-100 At most 0-100% 0-127 128-255 0-255 0-100 yellow white→yellow CMY color mixing...
Page 20 1,1 1-31 1-12 Color 1,1 Color 1,1→color 1,2 33-63 14-24 Color 1,2 Color 1,2→color 1,3 65-95 26-36 Color 1,3 Color 1,3→color 1,4 97-127 38-49 Color 1,4 Color 1,4→white 129-159 51-61 white Color wheel I 161-16 63-64...
Page 21 Color wheel 1, gobo and function 1-31 1-12 white white→color 2,1 33-63 14--24 Color 2,1 Color 2,1→color 2,2 65-95 26-37 Color 2,2 Color 2,2→color 2,3 97-127 39-50 Gobo 2,3 Color 2,3→color 2,4 129-159 52-62 Color 2,4 Color 2.4-white white...
Page 22 0-255 0-95 narrow 245-251 96-98 No change 252-255 99-100 Open (power mode) Reserved Color Marco 0-255 0-100 CMY rainbow Lamp power 100% 0-127 0-50 Lamp power 128-255 50-100 Reserved Fan speed adjustment Reserved Pan/Tilt macro Reserved...
Page 23 Tilt（maximum bit） maximum（up） middle maximum（down） Tilt（minimum bit） maximum（up） middle maximum（down）： speed pan/tilt moving tracking speed fast→slow 3-236 2-92 （ 237-239 tracking slow speed-PTSP） tracking （ normal 240-242 speed-PTSP）（ 243-245 tracking fast speed-PTSP） speed （ low 246-248 96-97...
Page 24 Speed：dimmer，cyan， magenta， yellow， CTC， focus tracking 3-239 1-93 Speed：fast—slow 240-242 94-95 tracking（do not over menu set） 243-245 tracking（could over menu set） 246-248 97-98 tracking(over menu set) 249-251 tracking(over menu set) 252-255 Speed fast CMY cyan(16bit) 0-255 0-100 CMY magenta(16bit)
Page 25: Menu Control
Menu control menu item choice Function illustration — — Address 1-512 DMX address Normal DMX pan control left CLOSE to right X Reverse Reversal DMX pan control right OPEN to left Normal DMX tilt control up CLOSE to down —...
Page 26 MIDDLE X、Y high speed mode X 、 Y medium speed — X、Y SP FAST mode Speed SLOW X、Y low speed mode X 、 Y 0-9, smooth — X、Y Smoot adjustable shutter, on/off, strobe, — Channel 01 0-255 reset, lighter —...
Page 27 — Channel 18 0-255 Tilt position: up, down Channel 19 Tilt position: up, down — Channel 20 0-255 XY speed control — Channel 21 0-255 Channel 22 … — 0-255 Channel 40 — Slot 0000-FFFF — Slot Color temperature...
Page 28 — Slot 0000-FFFF — Slot 0000-FFFF — Slot 0000-FFFF — Slot 0000-FFFF — Slot 0000-FFFF Magenta correction — Slot 0000-FFFF X correction — Slot 0000-FFFF Y correction — Slot … 0000-FFFF Slot Display lamp working — Lamp TMR 0000-9999...
Page 29 Rec 09 000-255 Frost gobo focus Rec 10 000-255 X rough adjustment Rec 11 000-255 X fine adjustment Rec 12 000-255 Y rough adjustment Rec 13 000-255 Y fine adjustment Rec 14 000-255 XY speed Rec 15 000-255 Other speed …...
Page 30: Routine Maintenance
Routine maintenance The FINE 2000/2500BEAM product requires routine cleaning. The service life depends on the operating environment heavily. Please kindly contact GUANGZHOU CHAI YI LIGHT CO., LTD for more maintenance indications not included in this user’s manual. Thanks. Important! Excessive dust, smoke fluid and particulate buildup will degrade performance and cause overheating or damage to the fixture that is not covered by the warranty.
Page 31 Cleaning or replacing inhaler 1. Power off the fixture. Using a crossing screwdriver to remove the 2 screws from each side of the head, and take out the inhaler cover. 2. Clean the inhaler with a vacuum or compressed air, or replace by a new one.
Page 32: Fine 2000E/2500E Beam Wiring Sketch
FINE 2000E/2500E BEAM wiring sketch - 32 -...
Page 33: Fine 2000M/2500M Beam Wiring Sketch
FINE 2000M/2500M BEAM wiring sketch - 33 -...

This manual is also suitable for:

Fine 2500beam