Getting Started; Install; Connect - Philips SA1200 User Manual

Getting started

Install

1 Insert the CD supplied with your product into the CD ROM drive of your PC.
2 Follow the onscreen instructions to complete the installation of the Firmware manager and if required, device drivers.
3 If the installation program does not start automatically, browse the CD contents via Windows Explorer and run the
program by double clicking on the file ending with .exe.
Windows 98SE user: To avoid installation problems, do not connect your device to the computer until after installation
completes.
Lost your CD? Don't worry, you can download the CD contents from
www.philips.com/usasupport

Connect

Insert the battery
1 Remove the USB cap.
Read the battery level indication of your player
The approximate power levels of your battery are indicated as follows:
Full Two-thirds full
TIP When the batteries are nearly empty, the battery low screen
60 seconds. Your player will save all settings and un-finished recordings before it powers down.
(for U.S. residents).
2 Remove the battery door by sliding
it in the direction of arrow.
Half full Low
www.philips.com/support or
3 Insert the supplied AAA battery into
the battery compartment.
Empty
blinks. Your player will power down in less than
3