Advertisement
Quick Links
Advertisement
Related Manuals for Aura ZEN
Summary of Contents for Aura ZEN
- Page 2 DIFFUSER Z E N SCENTWORKS (PTY) LTD 74 Kyalami Boulevard, Kyalami Business Park Midrand, Gauteng South Africa www.scentworks.co.za info@scentworks.co.za...
- Page 3 SCENTWORKS WARRANTY Once we have inspected the product and validated your return SCENTWORKS Pty Ltd at its sole option, will provide one of the following three: SCENTWORKS warrants our products against defects in materials and Elect to repair or facilitate the repair of any defective parts workmanship for a period of one year from the date of original purchase within a reasonable period of time, free of charge for the necessary parts and labour to complete the repair and to...
- Page 4 C .Maintenance D .Troubleshooting Simply add a few drops of AURA fragrance oil into the water filled reservoir, replace the cover and gently push down on the top of the diffuser to switch the device on. The auto shut off feature when water levels run low gives you peace of mind.
-
Page 5: Specifications
SPECIFICATIONS Product name: AURA Zen Product Size: 120MM, H147MM Input Voltage: 100~240V/50~60Hz Power: 12W Water Capacity: 100ML Cover MAX WATER A.Glass Ceramic disc LEVEL (100ML) Max water level line B.Base 3. Air-Vent (Water Tank) 4. Button C. Adaptor Push down on the top of the diffuser to switch it on or to change the mode. -
Page 6: Important Notes Before Use
Fill the water tank (100ml) with room temperature tap water. C. Water-soluble essential oil is recommended. Please contact your local dealer for further information. AURA fragrance oils are recommended for use in this diffuser. D. When the product is tripped during operation, liquid may then Add 10-12 drops If the product is knocked over during operation, liquid may flow flow into the internal space of the unit. -
Page 7: Maintenance
MAINTENANCE 5-6.Connect the adaptor to the base and plug-in to the 4. Put the cover back on. wall. 3. Remove the cover off. 1-2.Turn off the unit and pull out the plug 7.Press the power button and enjoy. - Page 8 Empty water from the back of the tank carefully without allowing water to flow into the air vent. Plug the power and press the button. Use a clean swab or cloth to clean the unit paying particular attention to the ceramic disc Overfill water(exceed 100ml) When not in use do not leave stagnant water inside the water...
Need help?
Do you have a question about the ZEN and is the answer not in the manual?
Questions and answers