Tandy 3980-06 Instructions For Use

I N ST RU CTION S
F OR U SE
T A N D Y P R O
& C R E A S I N G M A C H I N E
3 9 8 0 - 0 6
ON/OFF Switch
Heating Wand
INSTRUCTIONS FOR USE:
1. Attach the heating wand to the machine.
2. Screw on the desired tip.
3. Turn the machine on using on/off switch on back of machine.
4. Use the knob to select your desired temperature.
5. Allow the tip to heat up completely.
6. Slowly work the tip across the leather, pushing into the leather firmly .
7. When done, turn the machine off and set the wand into the groove on top of the box
making sure the tip doesn't touch any surfaces until completely cool.

CLEANING THE TIPS:

Brass Tips: Use high grit sandpaper (500 grit+) to remove any residue then buff the tip to remove any dust.
Steel Tips: Wipe the tip with an alcohol wipe to remove residue. DO NOT SAND STEEL TIPS.
® E D G I N G
Temperature
Control Knob