16 Update SA065
SA065 is controlled by an internal program
called firmware. Newer versions of the
firmware may have been released after you
have purchased SA065.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from SA065 or download the latest
version from www.philips.com/support.
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect SA065 to the computer
(see section Connect and charge for
instructions).
3
On your computer, click Start >
Programs > Philips Digital Audio Player
> SA065 Device Manager to launch
Philips Device Manager.
4
Click Update
» Philips GoGear SA065 Device
Manager checks for updates and
installs new firmware from the
Internet, if available.
5
When the display shows Update
completed, click OK.
6
Disconnect SA065 from the computer.
»
The display of SA065 shows
firmware
Updating
»
SA065 restarts after the firmware is
updated and is ready for use again.
EN
23