Table of Contents
Advertisement
5 Turn On and
Switch to Active
standby / Eco
standby
You can select from the following status options:
On (the full display and the remote
•
control are active, button LED is off)
Active standby (the clock display and the
•
remote control are active, button LED
is red)
•
Eco standby (the display and the remote
control are deactivated, button LED is
off)
In status On or Active standby,
1
press the
on the remote control to
toggle NP2500 between Active standby
and On.
2
press and hold the
switch to Eco standby.
In status Eco standby,
1
press the
button on NP2500 or on the
remote control to turn the NP2500 On.
Note
•
In stop (idle) mode, if no buttons are pressed
for 20 minutes, NP2500 switches to Active
standby.
on NP2500 to
EN
11
Advertisement
Table of Contents
