auna Silver Star Swing Manual page 47

EN
Menu navigation
The primary control for moving through menus and options is the remote
control. control. Press UP/DOWN/RIGHT/LEFT button to move up or down
a menu. Once the required option or value is highlighted press OK. All
menus and lists act as loops such that press buttons to go beyond the first
or last entry in a menu or list takes you to the opposite end of the menu or
list. So going up from first entry in a menu will take you to the last option
in the menu, etc. A scroll bar appears on the right of the screen if there are
more options above or below those visible.
To enter the menu tree in a particular mode press Menu.
To move back a menu level press Back.
To exit the menu system, press Menu again.
Each mode has a Mode menu, with options specific to that mode. For
example, the FM mode menu has two mode specific options: Scan setting
and Audio setting. In addition, each mode menu has one final option: Main
menu>. The '>' indicates options leading to further menus.
The main menu presents an alternative method for selecting listening
modes plus sleeps and alarm functions and one final option: System setting
> The '>' indicates options leading to further menus.
The System setting menu presents system setting functions to allow the
user to setup how the unit behaves. This includes network, time, language
and software parameters.
Text Entry
To enter search requests or passwords, etc. The data entry screen presents
all available characters and command functions in a continuous loop. Press
right/left/up/down button to scroll through the loop as required. Press OK
to select the currently highlighted character. If you make a mistake select
the BKSP (backspace) option to remove the last character. When you have
finished the words, select OK to enter the search words or password. Select
CANCEL to quit the entry screen.
Note: A short cut is available to reduce the amount of scrolling when
selecting commands and characters. Press the Info key to jump to the BKSP
(Backspace) command option, from anywhere in the character loop. To
enter a string of characters, select each character in turn. As each character
is selected, the key is built up and displayed in the field at the top of the
display. The three options – Backspace, OK and Cancel are included in the
selection loop. These can be accessed just using the remote control, press
the Info key, to jump to the BKSP (backspace) option.
Presets
In each of DAB, FM and Internet radio, up to 40 preset stations can be
stored and recalled.
47